{"title":"Kits and Bundles","description":"","products":[{"product_id":"retatrutide-premium-kit","title":"Retatrutide Premium Kit","description":"\u003ch2\u003eRetatrutide Premium Kit — Two-Vial Research Peptide + Lab Supplies Bundle\u003c\/h2\u003e\n\u003cp\u003eThe Retatrutide Premium Kit is the higher-volume bundle in the range, pairing two 10mg vials of lyophilised Retatrutide with a 10mL vial of bacteriostatic water, ten 1mL insulin syringes and four alcohol swabs. Retatrutide, developed under the code LY3437943, is a synthetic 39-amino-acid peptide built on a glucose-dependent insulinotropic polypeptide (GIP) backbone and engineered as a single molecule that activates three receptors: GIP, GLP-1 and glucagon. Researchers search for it as a retatrutide premium bundle or reta premium kit, and the peptide is often shortened to reta.\u003c\/p\u003e\n\u003cp\u003eRetatrutide is studied mainly for body-weight regulation in obesity models, glycaemic control in type 2 diabetes models and reduction of liver fat, with a Phase 3 clinical program under way. At the receptor level it is a triple agonist: GIP and GLP-1 receptor signalling is associated with glucose-dependent insulin release and reduced food intake, while glucagon receptor activation is linked to hepatic fat oxidation and energy expenditure, so the three pathways are investigated together.\u003c\/p\u003e\n\u003cp\u003eOmega Peptides Australia supplies the Retatrutide in this kit as a high-purity (≥99% HPLC), COA-verified lyophilised powder, dispatched same day from within Australia on orders placed before 12pm, with the batch Certificate of Analysis published in the \u003ca href=\"\/pages\/certifications-of-analysis\"\u003eCOA library\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat is included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 × Retatrutide 10mg vials\u003c\/strong\u003e, lyophilised powder in sealed sterile vials, ≥99% HPLC purity with a batch COA, $159.99 each separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × 10mL bacteriostatic water\u003c\/strong\u003e, sterile water with 0.9% benzyl alcohol preservative for reconstitution and multi-draw stability, $29.99 separately as the 10mL \u003ca href=\"\/products\/bacteriostatic-water\"\u003eBacteriostatic Water\u003c\/a\u003e vial.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 × 1mL insulin syringes\u003c\/strong\u003e, sterile, individually sealed, fixed-needle U-100 syringes, $19.99 separately as the \u003ca href=\"\/products\/1ml-insulin-needles\"\u003e1mL Insulin Needles\u003c\/a\u003e 10 Pack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 × alcohol swabs\u003c\/strong\u003e, individually sealed, for wiping vial septa before each puncture. Not sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKey research areas\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody-weight regulation\u003c\/strong\u003e Retatrutide was investigated in a 48-week Phase 2 obesity trial published in 2023 and is now the subject of the multi-trial Phase 3 TRIUMPH program. The proposed mechanism combines reduced food intake through GLP-1 and GIP signalling with increased energy expenditure through the glucagon receptor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlycaemic control\u003c\/strong\u003e A separate Phase 2 program in type 2 diabetes, published in 2023, examined glucose-lowering alongside weight change, and Phase 3 diabetes trials have followed. The pathway of interest is GIP and GLP-1 potentiation of glucose-dependent insulin secretion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHepatic fat and liver research\u003c\/strong\u003e A Phase 2a substudy published in 2024 measured liver-fat change in participants with fatty liver, reflecting interest in glucagon receptor activity on hepatic lipid metabolism.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCardiovascular and comorbidity models\u003c\/strong\u003e The Phase 3 program includes studies in obesity with established cardiovascular disease, obesity with knee osteoarthritis and a large cardiovascular outcomes trial.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple-agonist receptor pharmacology\u003c\/strong\u003e In-vitro work characterises how one peptide balances activity across three receptors. Retatrutide shows its greatest relative potency at the GIP receptor, and comparison with dual agonists such as Tirzepatide is an active line of research. Its C20 fatty diacid binds serum albumin, giving a plasma half-life of roughly six days.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy these are supplied together\u003c\/h2\u003e\n\u003cp\u003eRetatrutide is supplied as a lyophilised cake, so nothing can happen in a research model until it is brought into solution. Bacteriostatic water is the recommended diluent: it dissolves the peptide cleanly, adds no salts or buffers, and its 0.9% benzyl alcohol keeps each reconstituted vial bacteriostatic across repeated draws over 28 days. Two vials let a laboratory run parallel arms, repeat an experiment on the same batch, or open the second vial when the first reaches its 28-day limit.\u003c\/p\u003e\n\u003cp\u003eThe quantities scale with the two vials. A 10mL diluent vial reconstitutes both at any common volume and leaves diluent for dilution series, ten fixed-needle syringes graduated in 0.01mL units cover both reconstitution draws and eight aliquots, and four swabs cover every septum. Where a single-vial study is planned, the \u003ca href=\"\/products\/retatrutide-starter-kit\"\u003eRetatrutide Starter Kit\u003c\/a\u003e supplies one vial with proportionally smaller consumables.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompound\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRetatrutide (LY3437943)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAlso known as\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eReta, reta peptide, GIP\/GLP-1\/glucagon triple agonist\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCAS number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2381089-83-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMolecular formula\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eC221H342N46O68\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMolecular weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4731.33 g\/mol\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCategory\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMetabolic research\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePurity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e≥99% HPLC, batch COA supplied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eForm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLyophilised powder in sealed sterile vials (2 × 10mg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLab supplies included\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 × 10mL bacteriostatic water (0.9% benzyl alcohol, CAS 100-51-6); 10 × 1mL sterile insulin syringes; 4 × alcohol swabs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eKit price\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e$329.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage (lyophilised)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2–8°C short term or −20°C long term, protect from light and moisture, avoid repeated freeze-thaw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage (reconstituted)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2–8°C, use within 28 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReconstitution\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBacteriostatic water (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eAvailable sizes and pricing\u003c\/h2\u003e\n\u003cp\u003eThe Premium Kit is a single fixed configuration built around two 10mg vials. Purchased individually, the three priced components come to $369.96 (two Retatrutide 10mg vials at $159.99 each, 10mL bacteriostatic water $29.99, 10 pack of syringes $19.99), so the kit price of $329.99 saves $39.97 and adds four alcohol swabs. Across 20mg of peptide the kit works out to about $16.50 per mg including supplies. The \u003ca href=\"\/products\/ascension-bundle-retatrutide-melanotan-ghk-cu\"\u003eAscension Bundle\u003c\/a\u003e at the same $329.99 instead combines Retatrutide with Melanotan II and GHK-Cu.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRetatrutide Premium Kit, $329.99 (2 × 10mg vials, about $16.50 per mg including lab supplies)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eQuality and COA verification\u003c\/h2\u003e\n\u003cp\u003eEvery batch of Retatrutide supplied by Omega Peptides Australia is independently tested by Janoshik Analytical, with HPLC purity and mass spectrometry identity confirmation reported on a Certificate of Analysis, and each batch document is published in the \u003ca href=\"\/pages\/certifications-of-analysis\"\u003eCOA library\u003c\/a\u003e so both vials in the kit can be matched to their result. The peptide is lyophilised for stability and sealed in sterile vials that stay closed until the first reconstitution draw. The bacteriostatic water is sterile-filled under a tamper-evident cap, the syringes are individually sealed with capped needles, and the swabs are sealed in sachets. The kit is packed for domestic transit away from light and heat.\u003c\/p\u003e\n\u003ch2\u003eFrequently bought together\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/retatrutide-starter-kit\"\u003eRetatrutide Starter Kit\u003c\/a\u003e, $189.99, one 10mg vial with 3mL bacteriostatic water and five syringes for single-vial studies.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ascension-bundle-retatrutide-melanotan-ghk-cu\"\u003eAscension Bundle\u003c\/a\u003e, $329.99, Retatrutide with Melanotan II and GHK-Cu for multi-compound research.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bacteriostatic-water\"\u003eBacteriostatic Water (10mL)\u003c\/a\u003e, $29.99, a second diluent vial for extended dilution work.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/1ml-insulin-needles\"\u003e1mL Insulin Needles (10 Pack)\u003c\/a\u003e, $19.99, extra sterile syringes for longer sampling series.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResearch guides\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/retatrutide-research-guide\"\u003eRetatrutide research guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/best-place-to-buy-retatrutide-in-australia\"\u003eWhere Australian researchers source Retatrutide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/news\/peptide-storage-guide-how-to-store-lyophilised-peptides-properly\"\u003ePeptide storage guide: how to store lyophilised peptides properly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/news\/coa-testing-explained-research-peptides-australia\"\u003eCOA testing explained for research peptides in Australia\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/research-calculator\"\u003ePeptide reconstitution calculator\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/certifications-of-analysis\"\u003eCertificate of Analysis library\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the Retatrutide Premium Kit?\u003c\/strong\u003e\u003cbr\u003eThe kit contains two 10mg vials of lyophilised, COA-verified Retatrutide, one 10mL vial of bacteriostatic water, ten 1mL sterile insulin syringes and four alcohol swabs. Everything needed to reconstitute both vials and draw measured aliquots over their 28-day windows arrives in one order, with the batch COA in the COA library.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is Retatrutide?\u003c\/strong\u003e\u003cbr\u003eRetatrutide (LY3437943) is a synthetic 39-amino-acid peptide built on a GIP backbone and modified with a C20 fatty diacid so it binds albumin and circulates for days. It is a single-molecule agonist at the GIP, GLP-1 and glucagon receptors, investigated in obesity, type 2 diabetes and liver-fat models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need bacteriostatic water and syringes?\u003c\/strong\u003e\u003cbr\u003eYes. Retatrutide is supplied as a dry lyophilised powder and must be dissolved before it can be used in any in-vitro model. Bacteriostatic water is the recommended diluent because its preservative keeps each reconstituted vial usable across repeated draws, and fine-scale 1mL syringes measure the diluent and the small aliquots accurately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much do I save with the bundle?\u003c\/strong\u003e\u003cbr\u003eThe kit is priced at $329.99 against $369.96 for two Retatrutide 10mg vials, 10mL bacteriostatic water and a 10 pack of syringes bought separately, a saving of $39.97, with four alcohol swabs, which are not sold on their own, included free. It is the lowest-cost way to source two verified vials with supplies.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I buy the items separately?\u003c\/strong\u003e\u003cbr\u003eYes. \u003ca href=\"\/products\/retatrutide\"\u003eRetatrutide\u003c\/a\u003e is listed on its own in several vial sizes, bacteriostatic water is available in 3mL and 10mL vials, and the 1mL insulin needles come in 5 and 10 packs. Alcohol swabs are not listed separately, so the kits are currently the only way to include them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I buy Retatrutide at Chemist Warehouse or a pharmacy in Australia?\u003c\/strong\u003e\u003cbr\u003eNo. Retatrutide is an investigational compound that has not been approved by the TGA and is not listed on the Australian Register of Therapeutic Goods, so Chemist Warehouse, Priceline and other pharmacies do not stock it. Omega Peptides Australia supplies the lyophilised research-grade compound strictly for laboratory use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan Australian compounding pharmacies supply Retatrutide?\u003c\/strong\u003e\u003cbr\u003eCompounding pharmacies may only prepare a medicine for an individual patient on a valid prescription under Pharmacy Board standards, and Retatrutide is an unapproved investigational compound rather than a registered medicine, so it is not a standard compounding item. Research suppliers such as Omega Peptides Australia supply the lyophilised research compound for laboratory use only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do you reconstitute Retatrutide?\u003c\/strong\u003e\u003cbr\u003eSwab both septa, draw the planned volume of bacteriostatic water into a syringe and add it slowly down the inside wall of the Retatrutide vial rather than onto the powder. Swirl gently until clear, never shake, then label the vial, refrigerate at 2–8°C and use within 28 days. Reconstitute the second vial only when it is needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should Retatrutide be stored?\u003c\/strong\u003e\u003cbr\u003eKeep the lyophilised vials at 2–8°C for short-term storage or −20°C for long-term storage, protected from light and moisture, and avoid repeated freeze-thaw cycles. Once reconstituted, keep the solution refrigerated at 2–8°C and use it within 28 days. The bacteriostatic water and syringes are stored at room temperature with seals intact.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere can I buy the Retatrutide Premium Kit in Australia?\u003c\/strong\u003e\u003cbr\u003eOmega Peptides Australia holds the kit in domestic stock and dispatches same day on orders placed before 12pm, with tracked delivery Australia-wide and a batch COA for the peptide. It sits alongside the other COA-verified compounds in the \u003ca href=\"\/collections\/research-peptides-australia\"\u003eresearch peptides collection\u003c\/a\u003e, so related peptides can join the same order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the Retatrutide Premium Kit cost in Australia?\u003c\/strong\u003e\u003cbr\u003eThe kit is $329.99 for two 10mg vials of Retatrutide, about $16.50 per mg including the 10mL bacteriostatic water, ten syringes and four swabs. The Retatrutide Starter Kit is $189.99 for one 10mg vial with 3mL of water and five syringes, so the Premium Kit is the better value once two vials are needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I get the Retatrutide Premium Kit online in Australia?\u003c\/strong\u003e\u003cbr\u003eAdd the kit to the cart on this page and check out; orders placed before 12pm are dispatched the same business day from within Australia. Parcels travel in discreet packaging with tracked domestic shipping, and a tracking number is emailed once the parcel is lodged. The batch COA can be viewed in the COA library at any time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs Retatrutide legal in Australia?\u003c\/strong\u003e\u003cbr\u003eOmega Peptides Australia supplies Retatrutide strictly for lawful in-vitro laboratory research. It is not approved by the TGA for human or veterinary use and is not sold as a medicine or supplement. Purchasers are responsible for ensuring their intended use complies with all applicable laws.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetatrutide Premium Kit vs Starter Kit: what is the difference?\u003c\/strong\u003e\u003cbr\u003eThe Premium Kit supplies two 10mg vials with 10mL of bacteriostatic water, ten syringes and four swabs for $329.99, saving $39.97 against separate purchase. The \u003ca href=\"\/products\/retatrutide-starter-kit\"\u003eStarter Kit\u003c\/a\u003e supplies one 10mg vial with 3mL of water, five syringes and two swabs for $189.99. Both use the same COA-verified batch material.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e⚠ For in-vitro research and laboratory use only. Not for human or veterinary use.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Omega Peptides Australia","offers":[{"title":"Default Title","offer_id":43208925675582,"sku":"RETA-PREMIUM-KIT","price":329.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/2123\/3470\/files\/Retatrutide_premium_kit_Australia_peptide_vials_syringes_bacteriostatic_water.jpg?v=1787063512"},{"product_id":"retatrutide-melanotan-starter-kit","title":"Retatrutide + Melanotan 2 Starter Bundle","description":"\u003ch2\u003eRetatrutide + Melanotan 2 Starter Bundle — Dual Research Peptide + Lab Supplies Kit\u003c\/h2\u003e\n\u003cp\u003eThe Retatrutide + Melanotan 2 Starter Bundle pairs two of the most requested research peptides in one order: a 10mg vial of Retatrutide, the investigational triple agonist of the GIP, GLP-1 and glucagon receptors developed under the code LY3437943 and often shortened to reta, and a 10mg vial of Melanotan II, the cyclic alpha-MSH analogue usually written as MT2, MT-2 or melanotan 2. Researchers often search for this pairing as a retatrutide melanotan bundle or a reta MT2 kit; the sterile supplies needed for reconstitution are packed with both vials.\u003c\/p\u003e\n\u003cp\u003eRetatrutide is studied in metabolic research models for energy balance, glucose handling and hepatic fat. Its 39-amino-acid backbone is built on the GIP sequence and carries a C20 fatty diacid that binds albumin, extending its half-life to roughly six days. Melanotan II is investigated in melanocortin research for pigmentation, energy homeostasis and sexual-function signalling as a non-selective agonist at the MC1, MC3, MC4 and MC5 receptors. Both peptides act through G-protein-coupled receptors that raise intracellular cyclic AMP.\u003c\/p\u003e\n\u003cp\u003eOmega Peptides Australia supplies both peptides as high-purity (≥99% HPLC), COA-verified lyophilised powders in sealed sterile vials, dispatched same day from within Australia on orders placed before 12pm, with the batch Certificate of Analysis for each vial available in the \u003ca href=\"\/pages\/certifications-of-analysis\"\u003eCOA library\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat is included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × \u003ca href=\"\/products\/retatrutide\"\u003eRetatrutide\u003c\/a\u003e 10mg vial\u003c\/strong\u003e, lyophilised powder in a sealed sterile vial ($159.99 individually).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × \u003ca href=\"\/products\/melanotan-ii-10mg\"\u003eMelanotan II (MT2)\u003c\/a\u003e 10mg vial\u003c\/strong\u003e, lyophilised powder in a sealed sterile vial ($79.99 individually).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × 10mL \u003ca href=\"\/products\/bacteriostatic-water\"\u003ebacteriostatic water\u003c\/a\u003e\u003c\/strong\u003e, sterile water with 0.9% benzyl alcohol ($29.99 individually).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 × 1mL \u003ca href=\"\/products\/1ml-insulin-needles\"\u003einsulin syringes\u003c\/a\u003e\u003c\/strong\u003e, individually sealed, fixed needle (10 pack $19.99 individually).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 × alcohol swabs\u003c\/strong\u003e for cleaning vial stoppers before each puncture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKey research areas\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetabolic and energy-balance research (Retatrutide).\u003c\/strong\u003e The most clinically advanced triple incretin agonist, with Phase 2 and Phase 3 programmes reporting large, dose-dependent reductions in body weight. The glucagon-receptor component is thought to add energy expenditure and hepatic effects to the appetite signalling driven by GLP-1 and GIP.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlucose handling and incretin signalling (Retatrutide).\u003c\/strong\u003e GIP and GLP-1 receptor activation on pancreatic beta cells enhances glucose-dependent insulin release, and retatrutide has been investigated in type 2 diabetes populations for glycaemic outcomes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHepatic fat research (Retatrutide).\u003c\/strong\u003e Imaging sub-studies within the clinical programme have measured liver-fat content, making retatrutide a reference compound in steatotic liver disease research.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePigmentation and melanogenesis research (Melanotan II).\u003c\/strong\u003e MC1R activation on melanocytes raises cyclic AMP, activates MITF and upregulates tyrosinase, shifting melanin synthesis toward eumelanin. Melanotan II, developed at the University of Arizona in the 1980s, remains a standard MC1R agonist in these models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentral melanocortin signalling (Melanotan II).\u003c\/strong\u003e MC4R activation in the hypothalamus is studied for appetite and sexual-arousal pathways. Bremelanotide (PT-141) is a metabolite of Melanotan II, so the two are often compared.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy these are supplied together\u003c\/h2\u003e\n\u003cp\u003eRetatrutide and Melanotan II sit in different research categories, metabolic and melanocortin, but share the same handling requirements: both arrive lyophilised, both are reconstituted with bacteriostatic water, and both are refrigerated once in solution. Packing a 10mL vial of bacteriostatic water, ten 1mL syringes and alcohol swabs with the peptides removes the need to assemble supplies from separate orders, and 10mL is enough to reconstitute both vials with diluent to spare.\u003c\/p\u003e\n\u003cp\u003eThere is also a research rationale. Incretin and melanocortin pathways intersect in the hypothalamic control of energy balance: in rodent models, central GLP-1 receptor signalling engages pro-opiomelanocortin neurons that release alpha-MSH, the natural ligand Melanotan II mimics, so laboratories comparing the two pathways often source both compounds together. Retatrutide also differs from the dual agonist tirzepatide by adding glucagon-receptor activity, giving the bundle a distinct comparator set for receptor-pharmacology work.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBundle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRetatrutide + Melanotan 2 Starter Bundle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRetatrutide\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10mg lyophilised vial. Also known as LY3437943, reta. CAS 2381089-83-2. Formula C221H342N46O68. Molecular weight approx. 4731.3 g\/mol. 39 amino acids with a C20 fatty diacid.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMelanotan II\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10mg lyophilised vial. Also known as MT2, MT-2, melanotan 2. CAS 121062-08-6. Formula C50H69N15O9. Molecular weight 1024.2 g\/mol. Sequence Ac-Nle-cyclo[Asp-His-D-Phe-Arg-Trp-Lys]-NH2.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCategory\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMetabolic research; melanocortin and pigmentation research\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePurity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e≥99% HPLC for each peptide, batch COA supplied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eForm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLyophilised powder in sealed sterile vials\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLab supplies\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 × 10mL bacteriostatic water (0.9% benzyl alcohol); 10 × 1mL insulin syringes; 4 × alcohol swabs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBundle price\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e$269.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage (lyophilised)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2–8°C short term or −20°C long term, protect from light and moisture, avoid repeated freeze-thaw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage (reconstituted)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2–8°C, use within 28 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReconstitution\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBacteriostatic water (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eAvailable sizes and pricing\u003c\/h2\u003e\n\u003cp\u003eThe bundle comes in one configuration. Bought separately, the two peptide vials, 10mL bacteriostatic water and a 10 pack of syringes total $289.96, so the bundle saves about $20 and adds the swabs. The \u003ca href=\"\/products\/ascension-bundle-retatrutide-melanotan-ghk-cu\"\u003eAscension Bundle\u003c\/a\u003e adds a 50mg GHK-Cu vial to the same contents.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRetatrutide + Melanotan 2 Starter Bundle, $269.99 (Retatrutide 10mg at about $16.00 per mg and Melanotan II 10mg at about $8.00 per mg when priced individually, supplies included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eQuality and COA verification\u003c\/h2\u003e\n\u003cp\u003eEvery peptide batch in this bundle is tested independently by Janoshik Analytical: HPLC confirms purity at or above 99% and mass spectrometry confirms identity against the expected molecular weight. A Certificate of Analysis is issued for every batch and published in the \u003ca href=\"\/pages\/certifications-of-analysis\"\u003eCOA library\u003c\/a\u003e. Both peptides are lyophilised in sealed sterile vials, which keeps the powder stable in storage and domestic transit, and the kit is packed with the diluent and syringes secured separately.\u003c\/p\u003e\n\u003ch2\u003eFrequently bought together\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ascension-bundle-retatrutide-melanotan-ghk-cu\"\u003eAscension Bundle (Retatrutide, Melanotan II, GHK-Cu)\u003c\/a\u003e, $329.99, the same kit with a 50mg GHK-Cu vial for skin and collagen research.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/melanotan-ii-10mg\"\u003eMelanotan II (10mg)\u003c\/a\u003e, $79.99, a second MT2 vial for parallel melanocortin assays.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bacteriostatic-water\"\u003eBacteriostatic Water (10mL)\u003c\/a\u003e, $29.99, a spare diluent vial for repeat reconstitutions.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/1ml-insulin-needles\"\u003e1mL Insulin Needles (10 Pack)\u003c\/a\u003e, $19.99, additional sterile syringes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResearch guides\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/retatrutide-research-guide\"\u003eRetatrutide research guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/best-place-to-buy-retatrutide-in-australia\"\u003eBest place to buy Retatrutide in Australia\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/retatrutide-vs-tirzepatide\"\u003eRetatrutide vs tirzepatide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/news\/peptide-storage-guide-how-to-store-lyophilised-peptides-properly\"\u003ePeptide storage guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/news\/coa-testing-explained-research-peptides-australia\"\u003eCOA testing explained\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/research-calculator\"\u003ePeptide reconstitution calculator\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the Retatrutide + Melanotan 2 Starter Bundle?\u003c\/strong\u003e\u003cbr\u003eOne 10mg Retatrutide vial and one 10mg Melanotan II vial, both lyophilised powders in sealed sterile vials, plus one 10mL vial of bacteriostatic water, ten 1mL insulin syringes and four alcohol swabs, for $269.99. The \u003ca href=\"\/products\/ascension-bundle-retatrutide-melanotan-ghk-cu\"\u003eAscension Bundle\u003c\/a\u003e contains the same items plus a 50mg GHK-Cu vial, the copper tripeptide studied in skin and collagen research, for $329.99.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is Retatrutide?\u003c\/strong\u003e\u003cbr\u003eRetatrutide (LY3437943) is a synthetic 39-amino-acid peptide designed as a single-molecule agonist of the GIP, GLP-1 and glucagon receptors. A C20 fatty diacid on the backbone binds albumin, giving a half-life of about six days. It is an investigational Phase 3 compound studied in metabolic research models for energy balance, glucose regulation and hepatic fat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need bacteriostatic water and syringes?\u003c\/strong\u003e\u003cbr\u003eYes. Both peptides arrive as dry lyophilised powder and must be dissolved before any laboratory procedure. Bacteriostatic water is the recommended diluent because its 0.9% benzyl alcohol inhibits bacterial growth across repeated vial punctures. The 10mL vial, ten sterile 1mL syringes and four swabs supplied here cover both vials.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much do I save with the bundle?\u003c\/strong\u003e\u003cbr\u003ePurchased separately, a Retatrutide 10mg vial is $159.99, a Melanotan II 10mg vial $79.99, 10mL bacteriostatic water $29.99 and a 10 pack of 1mL syringes $19.99, a total of $289.96. The bundle is $269.99, a saving of about $20, with the alcohol swabs included at no charge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I buy the items separately?\u003c\/strong\u003e\u003cbr\u003eYes. Retatrutide is listed in 5mg, 10mg, 20mg, 30mg and 60mg vials, Melanotan II in a 10mg vial, bacteriostatic water in 3mL and 10mL vials, and 1mL syringes in 5 and 10 packs. Buying separately suits laboratories that already hold diluent and syringes; the bundle suits a first order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I buy Retatrutide at Chemist Warehouse or a pharmacy in Australia?\u003c\/strong\u003e\u003cbr\u003eNo. Retatrutide is an investigational Phase 3 compound not approved by the TGA, the FDA or any other regulator, so Chemist Warehouse, Priceline and other retail pharmacies do not stock it. Melanotan II is likewise not an approved medicine in Australia, and the TGA has warned against tanning products containing it. The compounds supplied here are laboratory products, not medicines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan Australian compounding pharmacies supply Retatrutide?\u003c\/strong\u003e\u003cbr\u003eRetatrutide is not a registered medicine in Australia. Compounding pharmacies may only prepare a product for an individual patient against a prescription, and any such preparation is a separate product from the research compound sold here. Omega Peptides Australia supplies the lyophilised research compounds for in-vitro laboratory use only and does not compound medicines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do you reconstitute Retatrutide and Melanotan II?\u003c\/strong\u003e\u003cbr\u003eWipe both stoppers with an alcohol swab. Draw the required volume of bacteriostatic water into a 1mL syringe and add it slowly down the inside wall of the peptide vial, not onto the powder. Swirl gently until clear; never shake. Label with the date, refrigerate at 2–8°C and use within 28 days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should the peptides in this bundle be stored?\u003c\/strong\u003e\u003cbr\u003eKeep the lyophilised vials sealed at 2–8°C short term or −20°C long term, protected from light and moisture, and avoid repeated freeze-thaw cycles. Once reconstituted, store both peptides at 2–8°C and use within 28 days. Bacteriostatic water is kept at room temperature and discarded 28 days after the first puncture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere can I buy Retatrutide in Australia?\u003c\/strong\u003e\u003cbr\u003eDirectly from Omega Peptides Australia. Stock is held domestically, orders placed before 12pm are dispatched the same day with tracked delivery, and every batch is supported by an independent Certificate of Analysis. The full range of vials, blends and kits is listed in the \u003ca href=\"\/collections\/research-peptides-australia\"\u003eresearch peptides collection\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does Retatrutide cost in Australia?\u003c\/strong\u003e\u003cbr\u003eThis bundle supplies Retatrutide 10mg and Melanotan II 10mg with bacteriostatic water, syringes and swabs for $269.99. Individually, a Retatrutide 10mg vial is $159.99, about $16.00 per mg, and a Melanotan II 10mg vial is $79.99, about $8.00 per mg. The Ascension Bundle adds a 50mg GHK-Cu vial for $329.99.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I get Retatrutide online in Australia?\u003c\/strong\u003e\u003cbr\u003eAdd the bundle to your cart from this page and complete checkout. Orders received before 12pm are dispatched the same business day from Australian stock, with tracked domestic shipping and discreet packaging that does not identify the contents. Tracking is emailed once the parcel is lodged.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs Retatrutide legal in Australia?\u003c\/strong\u003e\u003cbr\u003eOmega Peptides Australia supplies Retatrutide and Melanotan II strictly for lawful in-vitro laboratory research. Neither compound is approved by the TGA for human or veterinary use, and neither is sold as a medicine or supplement. Purchasers are responsible for ensuring their intended use complies with all applicable laws.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e⚠ For in-vitro research and laboratory use only. Not for human or veterinary use.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Omega Peptides Australia","offers":[{"title":"Default Title","offer_id":43208926265406,"sku":"RETA-MT2-KIT","price":269.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/2123\/3470\/files\/Retatrutide_Melanotan_starter_bundle.jpg?v=1787063514"},{"product_id":"ascension-bundle-retatrutide-melanotan-ghk-cu","title":"'Ascension' Bundle","description":"\u003ch2\u003eAscension Bundle — Retatrutide, Melanotan II and GHK-Cu Research Peptide Kit\u003c\/h2\u003e\n\u003cp\u003eThe Ascension Bundle is a triple-peptide research kit combining three compounds from three research categories in one order: a 10mg vial of Retatrutide, the investigational GIP, GLP-1 and glucagon receptor triple agonist often shortened to reta; a 10mg vial of Melanotan II, the cyclic alpha-MSH analogue written as MT2 or melanotan 2; and a 50mg vial of GHK-Cu, the copper-binding tripeptide also called copper peptide or copper tripeptide-1. Researchers usually search for it as the Ascension bundle or a retatrutide melanotan ghk-cu bundle; the sterile supplies for reconstitution are packed with the vials.\u003c\/p\u003e\n\u003cp\u003eRetatrutide is studied in metabolic research for energy balance, glucose handling and hepatic fat; its 39-amino-acid GIP-based backbone carries a C20 fatty diacid that binds albumin and extends its half-life to roughly six days. Melanotan II is investigated in melanocortin research as a non-selective agonist at the MC1, MC3, MC4 and MC5 receptors. GHK-Cu is studied in skin, collagen and wound-healing models, where it delivers copper to cells and modulates the expression of genes involved in extracellular-matrix remodelling.\u003c\/p\u003e\n\u003cp\u003eOmega Peptides Australia supplies all three as high-purity (≥99% HPLC), COA-verified lyophilised powders in sealed sterile vials, dispatched same day from within Australia on orders placed before 12pm, with each batch Certificate of Analysis available in the \u003ca href=\"\/pages\/certifications-of-analysis\"\u003eCOA library\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat is included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × \u003ca href=\"\/products\/retatrutide\"\u003eRetatrutide\u003c\/a\u003e 10mg vial\u003c\/strong\u003e, lyophilised powder in a sealed sterile vial ($159.99 individually).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × \u003ca href=\"\/products\/melanotan-ii-10mg\"\u003eMelanotan II (MT2)\u003c\/a\u003e 10mg vial\u003c\/strong\u003e, lyophilised powder ($79.99 individually).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × \u003ca href=\"\/products\/ghk-cu\"\u003eGHK-Cu\u003c\/a\u003e 50mg vial\u003c\/strong\u003e, lyophilised copper-peptide powder ($89.99 individually).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × 10mL \u003ca href=\"\/products\/bacteriostatic-water\"\u003ebacteriostatic water\u003c\/a\u003e\u003c\/strong\u003e, sterile water with 0.9% benzyl alcohol ($29.99 individually).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 × 1mL \u003ca href=\"\/products\/1ml-insulin-needles\"\u003einsulin syringes\u003c\/a\u003e\u003c\/strong\u003e, individually sealed, fixed needle (10 pack $19.99 individually).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 × alcohol swabs\u003c\/strong\u003e for cleaning vial stoppers before each puncture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKey research areas\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetabolic and energy-balance research (Retatrutide).\u003c\/strong\u003e The most clinically advanced triple incretin agonist, with Phase 2 and Phase 3 programmes reporting large, dose-dependent reductions in body weight. The glucagon-receptor component is thought to add energy expenditure and hepatic effects to GLP-1 and GIP appetite signalling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlucose and liver-fat research (Retatrutide).\u003c\/strong\u003e GIP and GLP-1 receptor activation enhances glucose-dependent insulin release, and imaging sub-studies in the clinical programme have measured liver-fat content in steatotic liver disease research.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePigmentation research (Melanotan II).\u003c\/strong\u003e MC1R activation on melanocytes raises cyclic AMP, activates MITF and upregulates tyrosinase, shifting melanin synthesis toward eumelanin. MC4R activation is separately studied for appetite and sexual-arousal signalling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkin and collagen research (GHK-Cu).\u003c\/strong\u003e First isolated from human plasma by Loren Pickart in 1973, GHK-Cu stimulates collagen and glycosaminoglycan synthesis in fibroblast cultures and has been studied for wound contraction and angiogenesis in animal models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGene expression and tissue remodelling (GHK-Cu).\u003c\/strong\u003e Gene-array studies report that GHK-Cu modulates a large number of human genes, including metalloproteinases and their inhibitors, decorin and growth factors such as VEGF, underpinning its use in extracellular-matrix and antioxidant research.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy these are supplied together\u003c\/h2\u003e\n\u003cp\u003eThe three peptides cover metabolic, melanocortin and dermal research but share identical handling: each arrives lyophilised, is reconstituted with bacteriostatic water, and is refrigerated once in solution. Supplying one 10mL vial of bacteriostatic water, ten 1mL syringes and alcohol swabs with the three vials means every compound is reconstituted with a diluent of known composition, with volume to spare.\u003c\/p\u003e\n\u003cp\u003eRetatrutide and Melanotan II both signal through G-protein-coupled receptors that raise cyclic AMP, and incretin and melanocortin pathways intersect in the hypothalamic control of energy balance, so the two are natural comparators. GHK-Cu adds a tissue-level compound: laboratories studying how rapid changes in adiposity affect skin structure, dermal collagen and wound repair pair it with metabolic agents to examine extracellular-matrix remodelling.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBundle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAscension Bundle (three research peptides plus laboratory supplies)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRetatrutide\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10mg lyophilised vial. Also known as LY3437943, reta. CAS 2381089-83-2. Formula C221H342N46O68. Molecular weight approx. 4731.3 g\/mol. 39 amino acids with a C20 fatty diacid.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMelanotan II\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10mg lyophilised vial. Also known as MT2, MT-2, melanotan 2. CAS 121062-08-6. Formula C50H69N15O9. Molecular weight 1024.2 g\/mol. Sequence Ac-Nle-cyclo[Asp-His-D-Phe-Arg-Trp-Lys]-NH2.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGHK-Cu\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50mg lyophilised vial. Also known as copper peptide, copper tripeptide-1. CAS 89030-95-5. Formula C14H22CuN6O4. Molecular weight approx. 401.9 g\/mol (copper complex). Sequence Gly-His-Lys, copper-bound.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCategory\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMetabolic research; melanocortin and pigmentation research; skin and collagen research\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePurity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e≥99% HPLC for each peptide, batch COA supplied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eForm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLyophilised powder in sealed sterile vials\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLab supplies\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 × 10mL bacteriostatic water (0.9% benzyl alcohol); 10 × 1mL insulin syringes; 4 × alcohol swabs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBundle price\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e$329.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage (lyophilised)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2–8°C short term or −20°C long term, protect from light and moisture, avoid repeated freeze-thaw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage (reconstituted)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2–8°C, use within 28 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReconstitution\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBacteriostatic water (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eAvailable sizes and pricing\u003c\/h2\u003e\n\u003cp\u003eThe Ascension Bundle comes in one configuration. Bought separately, the three peptide vials, 10mL bacteriostatic water and a 10 pack of syringes total $379.95, so the bundle saves about $50 and includes the swabs. Researchers who do not need GHK-Cu can choose the \u003ca href=\"\/products\/retatrutide-melanotan-starter-kit\"\u003eRetatrutide + Melanotan 2 Starter Bundle\u003c\/a\u003e at $269.99.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAscension Bundle, $329.99 (about $16.00, $8.00 and $1.80 per mg for Retatrutide, Melanotan II and GHK-Cu when priced individually, supplies included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eQuality and COA verification\u003c\/h2\u003e\n\u003cp\u003eEvery peptide batch in the Ascension Bundle is tested independently by Janoshik Analytical: HPLC confirms purity at or above 99% and mass spectrometry confirms identity against the expected molecular weight. A Certificate of Analysis is issued for every batch and published in the \u003ca href=\"\/pages\/certifications-of-analysis\"\u003eCOA library\u003c\/a\u003e. All three peptides are lyophilised in sealed sterile vials for stability in storage and domestic transit, and the kit is packed with the diluent and syringes secured separately.\u003c\/p\u003e\n\u003ch2\u003eFrequently bought together\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/retatrutide-melanotan-starter-kit\"\u003eRetatrutide + Melanotan 2 Starter Bundle\u003c\/a\u003e, $269.99, the same kit without GHK-Cu for metabolic and melanocortin work alone.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ghk-cu-100mg\"\u003eGHK-Cu (100mg)\u003c\/a\u003e, $119.99, a larger vial at a lower per-mg cost for extended skin and collagen studies.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/melanotan-ii-10mg\"\u003eMelanotan II (10mg)\u003c\/a\u003e, $79.99, a second MT2 vial for parallel melanocortin assays.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bacteriostatic-water\"\u003eBacteriostatic Water (10mL)\u003c\/a\u003e, $29.99, a spare diluent vial for repeat reconstitutions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResearch guides\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/retatrutide-research-guide\"\u003eRetatrutide research guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/best-place-to-buy-retatrutide-in-australia\"\u003eBest place to buy Retatrutide in Australia\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/ghk-cu-research-guide\"\u003eGHK-Cu research guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/best-place-to-buy-ghk-cu-australia\"\u003eBest place to buy GHK-Cu in Australia\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/news\/peptide-storage-guide-how-to-store-lyophilised-peptides-properly\"\u003ePeptide storage guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/news\/coa-testing-explained-research-peptides-australia\"\u003eCOA testing explained\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/research-calculator\"\u003ePeptide reconstitution calculator\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the Ascension Bundle?\u003c\/strong\u003e\u003cbr\u003eOne 10mg Retatrutide vial, one 10mg Melanotan II vial and one 50mg GHK-Cu vial, all lyophilised powders in sealed sterile vials, plus one 10mL vial of bacteriostatic water, ten 1mL insulin syringes and four alcohol swabs, for $329.99. Compared with the Retatrutide + Melanotan 2 Starter Bundle, the only difference is the GHK-Cu vial, which adds a skin and collagen research compound to the metabolic and melanocortin pair.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is Retatrutide?\u003c\/strong\u003e\u003cbr\u003eRetatrutide (LY3437943) is a synthetic 39-amino-acid peptide designed as a single-molecule agonist of the GIP, GLP-1 and glucagon receptors. A C20 fatty diacid on the backbone binds albumin, giving a half-life of about six days. It is an investigational Phase 3 compound studied in metabolic research models for energy balance, glucose regulation and hepatic fat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need bacteriostatic water and syringes?\u003c\/strong\u003e\u003cbr\u003eYes. All three peptides arrive as dry lyophilised powder and must be dissolved before any laboratory procedure. Bacteriostatic water is the recommended diluent because its 0.9% benzyl alcohol inhibits bacterial growth across repeated vial punctures. The 10mL vial, ten sterile 1mL syringes and four swabs supplied here cover all three vials.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much do I save with the bundle?\u003c\/strong\u003e\u003cbr\u003ePurchased separately, Retatrutide 10mg is $159.99, Melanotan II 10mg $79.99, GHK-Cu 50mg $89.99, 10mL bacteriostatic water $29.99 and a 10 pack of 1mL syringes $19.99, a total of $379.95. The Ascension Bundle is $329.99, a saving of about $50, with the alcohol swabs included at no charge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I buy the items separately?\u003c\/strong\u003e\u003cbr\u003eYes. Retatrutide is listed in 5mg to 60mg vials, Melanotan II in a 10mg vial, GHK-Cu in 50mg and 100mg vials, bacteriostatic water in 3mL and 10mL vials, and 1mL syringes in 5 and 10 packs. Buying separately suits laboratories that already hold diluent and syringes; the bundle suits a first order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I buy Retatrutide at Chemist Warehouse or a pharmacy in Australia?\u003c\/strong\u003e\u003cbr\u003eNo. Retatrutide is an investigational Phase 3 compound not approved by the TGA, the FDA or any other regulator, and Melanotan II is not an approved medicine in Australia, so neither is stocked by Chemist Warehouse, Priceline or other retail pharmacies. Some cosmetic serums sold in pharmacies list copper peptides as a topical ingredient; those are cosmetics, not the research-grade lyophilised GHK-Cu supplied here.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan Australian compounding pharmacies supply Retatrutide?\u003c\/strong\u003e\u003cbr\u003eRetatrutide is not a registered medicine in Australia. Compounding pharmacies may only prepare a product for an individual patient against a prescription, and any such preparation is a separate product from the research compound sold here. Omega Peptides Australia supplies the lyophilised research compounds for in-vitro laboratory use only and does not compound medicines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do you reconstitute the peptides in the Ascension Bundle?\u003c\/strong\u003e\u003cbr\u003eWipe both stoppers with an alcohol swab. Draw the required volume of bacteriostatic water into a 1mL syringe and add it slowly down the inside wall of the peptide vial, not onto the powder. Swirl gently until clear; never shake. Reconstituted GHK-Cu is a distinct blue solution. Label each vial, refrigerate at 2–8°C and use within 28 days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should the peptides in this bundle be stored?\u003c\/strong\u003e\u003cbr\u003eKeep the lyophilised vials sealed at 2–8°C short term or −20°C long term, protected from light and moisture, and avoid repeated freeze-thaw cycles. Once reconstituted, store all three peptides at 2–8°C and use within 28 days. Bacteriostatic water is kept at room temperature and discarded 28 days after the first puncture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere can I buy Retatrutide in Australia?\u003c\/strong\u003e\u003cbr\u003eDirectly from Omega Peptides Australia. Stock is held domestically, orders placed before 12pm are dispatched the same day with tracked delivery, and every batch is supported by an independent Certificate of Analysis. The full range of vials, blends and kits is listed in the \u003ca href=\"\/collections\/research-peptides-australia\"\u003eresearch peptides collection\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does Retatrutide cost in Australia?\u003c\/strong\u003e\u003cbr\u003eThe Ascension Bundle supplies Retatrutide 10mg, Melanotan II 10mg and GHK-Cu 50mg with bacteriostatic water, syringes and swabs for $329.99. Individually, Retatrutide 10mg is $159.99, about $16.00 per mg; Melanotan II 10mg is $79.99, about $8.00 per mg; and GHK-Cu 50mg is $89.99, about $1.80 per mg.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I get Retatrutide online in Australia?\u003c\/strong\u003e\u003cbr\u003eAdd the Ascension Bundle to your cart from this page and complete checkout. Orders received before 12pm are dispatched the same business day from Australian stock, with tracked domestic shipping and discreet packaging that does not identify the contents. Tracking is emailed once the parcel is lodged.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs Retatrutide legal in Australia?\u003c\/strong\u003e\u003cbr\u003eOmega Peptides Australia supplies Retatrutide, Melanotan II and GHK-Cu strictly for lawful in-vitro laboratory research. None of the three is approved by the TGA for human or veterinary use, and none is sold as a medicine or supplement. Purchasers are responsible for ensuring their intended use complies with all applicable laws.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e⚠ For in-vitro research and laboratory use only. Not for human or veterinary use.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Omega Peptides Australia","offers":[{"title":"Default Title","offer_id":43208926462014,"sku":"ASCENSION-BUNDLE","price":329.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/2123\/3470\/files\/Ascension_peptide_bundle.jpg?v=1787063514"},{"product_id":"retatrutide-starter-kit","title":"Retatrutide Starter Kit","description":"\u003ch2\u003eRetatrutide Starter Kit — Research Peptide + Lab Supplies Bundle\u003c\/h2\u003e\n\u003cp\u003eThe Retatrutide Starter Kit pairs one 10mg vial of lyophilised Retatrutide with the sterile consumables needed to reconstitute it: a 3mL vial of bacteriostatic water, five 1mL insulin syringes and two alcohol swabs. Retatrutide, developed under the code LY3437943, is a synthetic 39-amino-acid peptide built on a glucose-dependent insulinotropic polypeptide (GIP) backbone and engineered as a single molecule that activates three receptors: GIP, GLP-1 and glucagon. Researchers search for this bundle as a retatrutide kit, reta starter kit or retatrutide bundle, and the peptide is often shortened to reta.\u003c\/p\u003e\n\u003cp\u003eRetatrutide is studied mainly for body-weight regulation in obesity models, glycaemic control in type 2 diabetes models and reduction of liver fat, with a Phase 3 clinical program under way. At the receptor level it is a triple agonist: GIP and GLP-1 receptor signalling is associated with glucose-dependent insulin release and reduced food intake, while glucagon receptor activation is linked to hepatic fat oxidation and energy expenditure, so the three pathways are investigated together.\u003c\/p\u003e\n\u003cp\u003eOmega Peptides Australia supplies the Retatrutide in this kit as a high-purity (≥99% HPLC), COA-verified lyophilised powder, dispatched same day from within Australia on orders placed before 12pm, with the batch Certificate of Analysis published in the \u003ca href=\"\/pages\/certifications-of-analysis\"\u003eCOA library\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat is included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × Retatrutide 10mg vial\u003c\/strong\u003e, lyophilised powder in a sealed sterile vial, ≥99% HPLC purity with a batch COA, $159.99 separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × 3mL bacteriostatic water\u003c\/strong\u003e, sterile water with 0.9% benzyl alcohol preservative for reconstitution and multi-draw stability, $14.99 separately as the 3mL \u003ca href=\"\/products\/bacteriostatic-water\"\u003eBacteriostatic Water\u003c\/a\u003e vial.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 × 1mL insulin syringes\u003c\/strong\u003e, sterile, individually sealed, fixed-needle U-100 syringes, $15.99 separately as the \u003ca href=\"\/products\/1ml-insulin-needles\"\u003e1mL Insulin Needles\u003c\/a\u003e 5 Pack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 × alcohol swabs\u003c\/strong\u003e, individually sealed, for wiping vial septa before each puncture. Not sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKey research areas\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody-weight regulation\u003c\/strong\u003e Retatrutide was investigated in a 48-week Phase 2 obesity trial published in 2023 and is now the subject of the multi-trial Phase 3 TRIUMPH program. The proposed mechanism combines reduced food intake through GLP-1 and GIP signalling with increased energy expenditure through the glucagon receptor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlycaemic control\u003c\/strong\u003e A separate Phase 2 program in type 2 diabetes, published in 2023, examined glucose-lowering alongside weight change, and Phase 3 diabetes trials have followed. GIP and GLP-1 receptors both potentiate glucose-dependent insulin secretion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHepatic fat and liver research\u003c\/strong\u003e A Phase 2a substudy published in 2024 measured liver-fat change in participants with fatty liver, reflecting interest in glucagon receptor activity on hepatic lipid metabolism, and further liver-directed trials are under way.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCardiovascular and comorbidity models\u003c\/strong\u003e The Phase 3 program includes studies in obesity with established cardiovascular disease, obesity with knee osteoarthritis and a large cardiovascular outcomes trial.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple-agonist receptor pharmacology\u003c\/strong\u003e In-vitro work characterises how one peptide balances activity across three receptors. Retatrutide shows its greatest relative potency at the GIP receptor, and comparison with dual agonists such as Tirzepatide is an active line of research. Its C20 fatty diacid binds serum albumin, giving a plasma half-life of roughly six days.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy these are supplied together\u003c\/h2\u003e\n\u003cp\u003eRetatrutide is supplied as a lyophilised cake, so nothing can happen in a research model until it is brought into solution. Bacteriostatic water is the recommended diluent: it dissolves the peptide cleanly, adds no salts or buffers, and its 0.9% benzyl alcohol keeps the reconstituted vial bacteriostatic across repeated draws over 28 days. Because Retatrutide is studied at low concentrations, a single 10mg vial is reconstituted once and sampled many times.\u003c\/p\u003e\n\u003cp\u003eThe syringes and swabs close the loop. Fixed-needle 1mL syringes graduated in 0.01mL units measure the diluent going in and the aliquots coming out, while the swabs decontaminate the septa. A 3mL diluent vial covers a 10mg vial at any common reconstitution volume, five syringes cover the reconstitution draw and four aliquots, and two swabs cover both septa. Longer studies suit the two-vial \u003ca href=\"\/products\/retatrutide-premium-kit\"\u003eRetatrutide Premium Kit\u003c\/a\u003e, which includes 10mL of water and ten syringes.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompound\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRetatrutide (LY3437943)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAlso known as\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eReta, reta peptide, GIP\/GLP-1\/glucagon triple agonist\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCAS number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2381089-83-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMolecular formula\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eC221H342N46O68\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMolecular weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4731.33 g\/mol\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCategory\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMetabolic research\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePurity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e≥99% HPLC, batch COA supplied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eForm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLyophilised powder in a sealed sterile vial (1 × 10mg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLab supplies included\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 × 3mL bacteriostatic water (0.9% benzyl alcohol, CAS 100-51-6); 5 × 1mL sterile insulin syringes; 2 × alcohol swabs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eKit price\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e$189.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage (lyophilised)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2–8°C short term or −20°C long term, protect from light and moisture, avoid repeated freeze-thaw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage (reconstituted)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2–8°C, use within 28 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReconstitution\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBacteriostatic water (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eAvailable sizes and pricing\u003c\/h2\u003e\n\u003cp\u003eThe Starter Kit is a single fixed configuration built around one 10mg vial. Purchased individually, the three priced components come to $190.97 (Retatrutide 10mg $159.99, 3mL bacteriostatic water $14.99, 5 pack of syringes $15.99), so the kit price of $189.99 matches that total with the two alcohol swabs included at no extra cost. The peptide works out to about $16.00 per mg. Laboratories needing more material should compare the Retatrutide Premium Kit at $329.99 for two 10mg vials.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRetatrutide Starter Kit, $189.99 (1 × 10mg vial, about $16.00 per mg of peptide, plus lab supplies)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eQuality and COA verification\u003c\/h2\u003e\n\u003cp\u003eEvery batch of Retatrutide supplied by Omega Peptides Australia is independently tested by Janoshik Analytical, with HPLC purity and mass spectrometry identity confirmation reported on a Certificate of Analysis, and each batch document is published in the \u003ca href=\"\/pages\/certifications-of-analysis\"\u003eCOA library\u003c\/a\u003e so the vial in the kit can be matched to its result. The peptide is lyophilised for stability and sealed in a sterile vial that stays closed until the first reconstitution draw. The bacteriostatic water is sterile-filled under a tamper-evident cap, the syringes are individually sealed with capped needles, and the swabs are sealed in sachets. The kit is packed for domestic transit, protected from light and heat.\u003c\/p\u003e\n\u003ch2\u003eFrequently bought together\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/retatrutide-premium-kit\"\u003eRetatrutide Premium Kit\u003c\/a\u003e, $329.99, two 10mg vials with 10mL bacteriostatic water and ten syringes for longer studies.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bacteriostatic-water\"\u003eBacteriostatic Water (10mL)\u003c\/a\u003e, $29.99, a larger diluent vial for laboratories reconstituting several peptides.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/1ml-insulin-needles\"\u003e1mL Insulin Needles (10 Pack)\u003c\/a\u003e, $19.99, extra sterile syringes for extended sampling.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ghk-cu\"\u003eGHK-Cu (50mg)\u003c\/a\u003e, $89.99, a copper tripeptide for skin and tissue research models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResearch guides\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/retatrutide-research-guide\"\u003eRetatrutide research guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/best-place-to-buy-retatrutide-in-australia\"\u003eWhere Australian researchers source Retatrutide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/retatrutide-vs-tirzepatide\"\u003eRetatrutide vs Tirzepatide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/news\/peptide-storage-guide-how-to-store-lyophilised-peptides-properly\"\u003ePeptide storage guide: how to store lyophilised peptides properly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/news\/coa-testing-explained-research-peptides-australia\"\u003eCOA testing explained for research peptides in Australia\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/research-calculator\"\u003ePeptide reconstitution calculator\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/certifications-of-analysis\"\u003eCertificate of Analysis library\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the Retatrutide Starter Kit?\u003c\/strong\u003e\u003cbr\u003eThe kit contains one 10mg vial of lyophilised, COA-verified Retatrutide, one 3mL vial of bacteriostatic water, five 1mL sterile insulin syringes and two alcohol swabs. Everything needed to reconstitute the vial and draw measured aliquots over 28 days arrives in one order, with the batch COA in the COA library.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is Retatrutide?\u003c\/strong\u003e\u003cbr\u003eRetatrutide (LY3437943) is a synthetic 39-amino-acid peptide built on a GIP backbone and modified with a C20 fatty diacid so it binds albumin and circulates for days. It is a single-molecule agonist at the GIP, GLP-1 and glucagon receptors, investigated in obesity, type 2 diabetes and liver-fat models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need bacteriostatic water and syringes?\u003c\/strong\u003e\u003cbr\u003eYes. Retatrutide is supplied as a dry lyophilised powder and must be dissolved before it can be used in any in-vitro model. Bacteriostatic water is the recommended diluent because its preservative keeps the reconstituted vial usable across repeated draws, and fine-scale 1mL syringes measure the diluent and the small aliquots accurately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much do I save with the bundle?\u003c\/strong\u003e\u003cbr\u003eThe kit is priced at $189.99 against $190.97 for the Retatrutide 10mg vial, 3mL bacteriostatic water and 5 pack of syringes bought separately, so the saving is about a dollar, with the two alcohol swabs, which are not sold on their own, included free. The main value is a single verified order ready to reconstitute.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I buy the items separately?\u003c\/strong\u003e\u003cbr\u003eYes. \u003ca href=\"\/products\/retatrutide\"\u003eRetatrutide\u003c\/a\u003e is listed on its own in several vial sizes, bacteriostatic water is available in 3mL and 10mL vials, and the 1mL insulin needles come in 5 and 10 packs. Alcohol swabs are not listed separately, so the kits are currently the only way to include them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I buy Retatrutide at Chemist Warehouse or a pharmacy in Australia?\u003c\/strong\u003e\u003cbr\u003eNo. Retatrutide is an investigational compound that has not been approved by the TGA and is not listed on the Australian Register of Therapeutic Goods, so Chemist Warehouse, Priceline and other pharmacies do not stock it. Omega Peptides Australia supplies the lyophilised research-grade compound strictly for laboratory use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan Australian compounding pharmacies supply Retatrutide?\u003c\/strong\u003e\u003cbr\u003eCompounding pharmacies may only prepare a medicine for an individual patient on a valid prescription under Pharmacy Board standards, and Retatrutide is an unapproved investigational compound rather than a registered medicine, so it is not a standard compounding item. Research suppliers such as Omega Peptides Australia supply the lyophilised research compound for laboratory use only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do you reconstitute Retatrutide?\u003c\/strong\u003e\u003cbr\u003eSwab both septa, draw the planned volume of bacteriostatic water into a syringe and add it slowly down the inside wall of the Retatrutide vial rather than onto the powder. Swirl gently until clear, never shake, then label the vial, refrigerate at 2–8°C and use within 28 days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should Retatrutide be stored?\u003c\/strong\u003e\u003cbr\u003eKeep the lyophilised vial at 2–8°C for short-term storage or −20°C for long-term storage, protected from light and moisture, and avoid repeated freeze-thaw cycles. Once reconstituted, keep the solution refrigerated at 2–8°C and use it within 28 days. The bacteriostatic water and syringes are stored at room temperature with seals intact.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere can I buy the Retatrutide Starter Kit in Australia?\u003c\/strong\u003e\u003cbr\u003eOmega Peptides Australia holds the kit in domestic stock and dispatches same day on orders placed before 12pm, with tracked delivery Australia-wide and a batch COA for the peptide. It sits alongside the other COA-verified compounds in the \u003ca href=\"\/collections\/research-peptides-australia\"\u003eresearch peptides collection\u003c\/a\u003e, so related peptides can join the same order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the Retatrutide Starter Kit cost in Australia?\u003c\/strong\u003e\u003cbr\u003eThe kit is $189.99 for one 10mg vial of Retatrutide, about $16.00 per mg, with 3mL bacteriostatic water, five syringes and two swabs. The Retatrutide Premium Kit is $329.99 for two 10mg vials with 10mL of water and ten syringes, a lower effective cost for laboratories needing more material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I get the Retatrutide Starter Kit online in Australia?\u003c\/strong\u003e\u003cbr\u003eAdd the kit to the cart on this page and check out; orders placed before 12pm are dispatched the same business day from within Australia. Parcels travel in discreet packaging with tracked domestic shipping, and a tracking number is emailed once the parcel is lodged.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs Retatrutide legal in Australia?\u003c\/strong\u003e\u003cbr\u003eOmega Peptides Australia supplies Retatrutide strictly for lawful in-vitro laboratory research. It is not approved by the TGA for human or veterinary use and is not sold as a medicine or supplement. Purchasers are responsible for ensuring their intended use complies with all applicable laws.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetatrutide Starter Kit vs Premium Kit: what is the difference?\u003c\/strong\u003e\u003cbr\u003eThe Starter Kit supplies one 10mg vial with 3mL of bacteriostatic water, five syringes and two swabs for $189.99. The \u003ca href=\"\/products\/retatrutide-premium-kit\"\u003ePremium Kit\u003c\/a\u003e supplies two 10mg vials with 10mL of water, ten syringes and four swabs for $329.99, a lower cost per vial for longer studies. Both use the same COA-verified batch material.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e⚠ For in-vitro research and laboratory use only. Not for human or veterinary use.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Omega Peptides Australia","offers":[{"title":"Default Title","offer_id":43208927281214,"sku":"RETA-STARTER-KIT","price":189.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/2123\/3470\/files\/Retatrutide_starter_kit.jpg?v=1787063516"},{"product_id":"starter-kit","title":"Starter Kit","description":"\u003ch2\u003eStarter Kit — Bacteriostatic Water + Sterile Syringes + Alcohol Swabs Lab Supplies Bundle\u003c\/h2\u003e\n\u003cp\u003ePeptide Starter Kit is supplied in Australia by Omega Peptides Australia from domestic stock, with same-day dispatch on orders placed before 12pm. Also searched as peptide kit or reconstitution kit, it provides the consumables needed to reconstitute and measure a research peptide.\u003c\/p\u003e\n\u003cp\u003eThe Starter Kit is a single-order set of the sterile consumables needed to reconstitute one lyophilised research peptide vial and draw from it over the following weeks: one 3mL vial of bacteriostatic water, five 1mL sterile insulin syringes and two alcohol swabs. It contains no peptide. Researchers usually search for it as a peptide starter kit, a reconstitution kit or a lab supplies kit.\u003c\/p\u003e\n\u003cp\u003eEach component covers one step of the reconstitution workflow. The alcohol swabs clean the rubber septa of the diluent and peptide vials before the needle passes through. The bacteriostatic water, sterile water preserved with 0.9% benzyl alcohol, dissolves the lyophilised powder and keeps the resulting solution bacteriostatic across repeated draws. The 1mL syringes, graduated in U-100 units of 0.01mL, measure the diluent going in and the aliquots coming out.\u003c\/p\u003e\n\u003cp\u003eOmega Peptides Australia supplies the Starter Kit as the companion bundle to its high-purity (≥99% HPLC), COA-verified lyophilised research peptides. Orders are dispatched same day from within Australia when placed before 12pm, and the batch Certificates of Analysis for every peptide the kit is used with are published in the \u003ca href=\"\/pages\/certifications-of-analysis\"\u003eCOA library\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat is included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × 3mL bacteriostatic water\u003c\/strong\u003e, sterile water with 0.9% benzyl alcohol preservative in a sealed vial with a resealable septum. Sold separately as the 3mL \u003ca href=\"\/products\/bacteriostatic-water\"\u003eBacteriostatic Water\u003c\/a\u003e vial for $14.99.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 × 1mL sterile insulin syringes\u003c\/strong\u003e, fixed-needle U-100 syringes, individually sealed and single use. Sold separately as the \u003ca href=\"\/products\/1ml-insulin-needles\"\u003e1mL Insulin Needles\u003c\/a\u003e 5 Pack for $15.99.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 × alcohol swabs\u003c\/strong\u003e, individually sealed sachets for wiping vial septa before each puncture. Not listed separately on the site.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKey research areas\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTissue-repair research\u003c\/strong\u003e Peptides such as \u003ca href=\"\/products\/bpc-157\"\u003eBPC-157\u003c\/a\u003e and \u003ca href=\"\/products\/tb-500\"\u003eTB-500\u003c\/a\u003e are supplied as 10mg lyophilised vials that dissolve readily in bacteriostatic water. The kit's 3mL vial reconstitutes one such vial with diluent to spare.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkin and collagen research\u003c\/strong\u003e \u003ca href=\"\/products\/ghk-cu\"\u003eGHK-Cu\u003c\/a\u003e is supplied in 50mg and 100mg vials and is often reconstituted at higher volumes; the kit covers a 50mg vial, and the 10mL bacteriostatic water is the better match for 100mg.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrowth hormone secretagogue research\u003c\/strong\u003e \u003ca href=\"\/products\/ipamorelin\"\u003eIpamorelin\u003c\/a\u003e, \u003ca href=\"\/products\/sermorelin\"\u003eSermorelin\u003c\/a\u003e and the \u003ca href=\"\/products\/cjc-1295-no-dac-ipamorelin-blend-10mg\"\u003eCJC-1295 No DAC and Ipamorelin blend\u003c\/a\u003e are drawn in small aliquots for in-vitro secretagogue assays, where the 0.01mL syringe resolution earns its place.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetabolic research\u003c\/strong\u003e Incretin-pathway peptides such as \u003ca href=\"\/products\/tirzepatide\"\u003eTirzepatide\u003c\/a\u003e and Retatrutide are studied at low concentrations, so a single vial is reconstituted once and sampled many times over 28 days, exactly the pattern the preserved diluent and five syringes are designed for.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNootropic peptide research\u003c\/strong\u003e \u003ca href=\"\/products\/semax\"\u003eSemax\u003c\/a\u003e and \u003ca href=\"\/products\/selank\"\u003eSelank\u003c\/a\u003e are short heptapeptides handled in small volumes for receptor and cell-culture models, and the kit brings a vial into solution cleanly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy these are supplied together\u003c\/h2\u003e\n\u003cp\u003eReconstitution is a short aseptic procedure with three failure points: a contaminated septum, an inaccurate volume and an unpreserved solution. The kit addresses each with a purpose-made item. The swabs remove surface contamination from the rubber stoppers so the needle does not carry it into the vial. The preserved diluent means the trace contamination that accompanies repeated needle entry is held in check by benzyl alcohol rather than left to grow in a nutrient-rich peptide solution. The fine-scale syringes let the researcher hit the planned concentration on the first attempt, which matters when the peptide vial is the expensive part of the experiment.\u003c\/p\u003e\n\u003cp\u003eThe quantities suit a single-vial study. A 3mL diluent vial reconstitutes one 10mg peptide vial at any common volume with enough left for a dilution step. Five syringes cover the reconstitution draw and four aliquots, and two swabs cover both septa. Laboratories running several peptides or a longer series should add the 10mL bacteriostatic water and the 10 pack of syringes, or choose a peptide-inclusive bundle from the \u003ca href=\"\/collections\/kits-and-bundles\"\u003ekits and bundles collection\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStarter Kit (lab supplies bundle, no peptide included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAlso known as\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePeptide starter kit, reconstitution kit, lab supplies kit, peptide kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBacteriostatic water\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 × 3mL, sterile water with 0.9% benzyl alcohol (CAS 100-51-6), clear colourless solution, resealable septum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSyringes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 × 1mL fixed-needle insulin syringes, U-100 scale (1 unit = 0.01mL), sterile, individually sealed, single use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAlcohol swabs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 × individually sealed swabs for septum preparation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCategory\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLab supplies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eKit price\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e$39.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage (unopened)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRoom temperature, 20–25°C, dry, protect from light, do not freeze the water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage (water after first puncture)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUse within 28 days; keep capped and swab the septum before each draw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage (reconstituted peptide)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2–8°C, use within 28 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eAvailable sizes and pricing\u003c\/h2\u003e\n\u003cp\u003eThe Starter Kit is a single fixed configuration at $39.99. Bought individually, the 3mL bacteriostatic water is $14.99 and the 5 pack of 1mL syringes is $15.99, a combined $30.98; the alcohol swabs are not sold separately. The kit is priced as a convenience item with the swabs included rather than as a discounted bundle, so researchers who only need water and syringes may prefer to order those two products directly.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStarter Kit, $39.99 (1 × 3mL bacteriostatic water, 5 × 1mL syringes, 2 × alcohol swabs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eQuality and COA verification\u003c\/h2\u003e\n\u003cp\u003eEvery research peptide supplied by Omega Peptides Australia is independently tested by Janoshik Analytical, with HPLC purity and mass spectrometry identity reported on a Certificate of Analysis for each batch, and those documents are published in the \u003ca href=\"\/pages\/certifications-of-analysis\"\u003eCOA library\u003c\/a\u003e. The kit components are consumables rather than analytes, so they carry sterility assurance instead of a peptide COA: the water is sterile-filled under a tamper-evident cap, each syringe is sterilised and sealed in its own wrapper with a capped needle, and the swabs are individually sealed. Any item with a broken seal should be discarded. The kit travels intact by domestic post and needs no cold chain.\u003c\/p\u003e\n\u003ch2\u003eFrequently bought together\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bacteriostatic-water\"\u003eBacteriostatic Water (10mL)\u003c\/a\u003e, $29.99, the larger diluent vial for laboratories reconstituting several peptides.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/1ml-insulin-needles\"\u003e1mL Insulin Needles (10 Pack)\u003c\/a\u003e, $19.99, extra sterile syringes for longer sampling series.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bpc-157\"\u003eBPC-157 (10mg)\u003c\/a\u003e, $99.99, a water-soluble pentadecapeptide that the kit reconstitutes in a single step.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ghk-cu\"\u003eGHK-Cu (50mg)\u003c\/a\u003e, $89.99, a copper tripeptide for skin and collagen research models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResearch guides\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/news\/peptide-storage-guide-how-to-store-lyophilised-peptides-properly\"\u003ePeptide storage guide: how to store lyophilised peptides properly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/news\/coa-testing-explained-research-peptides-australia\"\u003eCOA testing explained for research peptides in Australia\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/research-calculator\"\u003ePeptide reconstitution calculator\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/certifications-of-analysis\"\u003eCertificate of Analysis library\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the Starter Kit?\u003c\/strong\u003e\u003cbr\u003eThe kit contains one 3mL vial of bacteriostatic water, five 1mL sterile insulin syringes and two alcohol swabs, each individually sealed. It does not contain a peptide. Together the three items cover septum preparation, reconstitution of a lyophilised vial and the measured draws that follow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is bacteriostatic water?\u003c\/strong\u003e\u003cbr\u003eBacteriostatic water is sterile, purified water preserved with 0.9% benzyl alcohol. The preservative inhibits bacterial growth, so a vial can be entered repeatedly over 28 days, and it contains no salts or buffers that would interfere with a peptide solution. It is the diluent recommended on every research peptide page at Omega Peptides Australia.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need bacteriostatic water and syringes?\u003c\/strong\u003e\u003cbr\u003eYes, if the peptide will be used in solution. Lyophilised peptides are a dry powder that must be dissolved before any in-vitro work, and a preserved sterile diluent is the standard choice when the vial will be drawn from more than once. Fine-scale syringes are needed to measure the diluent and aliquots accurately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much do I save with the bundle?\u003c\/strong\u003e\u003cbr\u003eThe Starter Kit is a convenience bundle rather than a discount bundle. At $39.99 it costs more than the 3mL bacteriostatic water ($14.99) and the 5 pack of syringes ($15.99) bought separately, with the two alcohol swabs, which are not sold on their own, making up the difference. Choose it for a complete one-line order with swabs included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I buy the items separately?\u003c\/strong\u003e\u003cbr\u003eYes. The bacteriostatic water is available on its own in 3mL and 10mL vials, and the 1mL insulin needles are sold in 5 and 10 packs, both listed above. Alcohol swabs are not listed as a separate product, so the kit is currently the only way to include them in an order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I buy a peptide starter kit at Chemist Warehouse or a pharmacy in Australia?\u003c\/strong\u003e\u003cbr\u003eNot as a kit. Pharmacies sell syringes and swabs individually, but they do not sell a reconstitution kit assembled for peptide research, and they do not stock research-grade bacteriostatic water alongside them. Omega Peptides Australia supplies the set as laboratory consumables for research use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan Australian compounding pharmacies supply a reconstitution kit?\u003c\/strong\u003e\u003cbr\u003eCompounding pharmacies supply consumables and diluents to their own clinical customers under pharmacy regulation, but they do not sell a research reconstitution kit. Research suppliers such as Omega Peptides Australia supply the water, syringes and swabs as laboratory consumables for reconstituting research peptides, a separate purpose from pharmacy dispensing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do you reconstitute a peptide with the Starter Kit?\u003c\/strong\u003e\u003cbr\u003eSwab the septa of both vials, draw the planned volume of bacteriostatic water into a syringe and add it slowly down the inside wall of the peptide vial rather than onto the powder. Swirl gently until clear, never shake, then label the vial, refrigerate at 2–8°C and use the solution within 28 days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should the Starter Kit be stored?\u003c\/strong\u003e\u003cbr\u003eKeep the unopened kit on a dry shelf at room temperature, ideally 20–25°C, away from direct light, and do not freeze the water. After the water vial is first punctured, keep it capped and use it within 28 days. Syringes and swabs stay sterile only while their seals are intact.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere can I buy a peptide starter kit in Australia?\u003c\/strong\u003e\u003cbr\u003eOmega Peptides Australia holds the Starter Kit in domestic stock and dispatches same day on orders placed before 12pm, with tracked delivery Australia-wide. It is stocked to pair with the COA-verified lyophilised peptides in the \u003ca href=\"\/collections\/research-peptides-australia\"\u003eresearch peptides collection\u003c\/a\u003e, so the peptide and every consumable arrive together.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the Starter Kit cost in Australia?\u003c\/strong\u003e\u003cbr\u003eThe Starter Kit is $39.99 for one 3mL bacteriostatic water vial, five 1mL sterile syringes and two alcohol swabs. For comparison, the 3mL water alone is $14.99, the 10mL water is $29.99, and syringes are $15.99 for 5 or $19.99 for 10, so larger sets can be built from those lines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I get the Starter Kit online in Australia?\u003c\/strong\u003e\u003cbr\u003eAdd the Starter Kit to the cart on this page together with the research peptide it will be used for, then check out. Orders placed before 12pm are dispatched the same business day from within Australia in discreet packaging, with a tracking number emailed once the parcel is lodged.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Starter Kit legal in Australia?\u003c\/strong\u003e\u003cbr\u003eOmega Peptides Australia supplies the Starter Kit strictly for lawful in-vitro laboratory research. It is supplied as laboratory consumables, not for human or veterinary use, and is not sold as a medicine or supplement. Purchasers are responsible for ensuring their intended use complies with all applicable laws.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich peptides does the Starter Kit suit?\u003c\/strong\u003e\u003cbr\u003eAny single lyophilised vial reconstituted at up to about 3mL, which covers the 10mg vials of BPC-157, TB-500, Ipamorelin, Semax and most of the catalogue, as well as 50mg GHK-Cu. For 100mg GHK-Cu, several vials at once or a long sampling series, add the 10mL bacteriostatic water and a 10 pack of syringes.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e⚠ For in-vitro research and laboratory use only. Not for human or veterinary use.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Omega Peptides Australia","offers":[{"title":"Default Title","offer_id":43208935145534,"sku":"STARTER-KIT","price":39.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/2123\/3470\/files\/Starter_kit..png?v=1787063552"},{"product_id":"glow-bundle","title":"GLOW Peptide Bundle","description":"\u003ch2\u003eGLOW Peptide Bundle — GHK-Cu + BPC-157\/TB-500 Blend Research Combination\u003c\/h2\u003e\n\u003cp\u003eGLOW Peptide Bundle is supplied in Australia by Omega Peptides Australia from domestic stock, with same-day dispatch on orders placed before 12pm. Also searched as GLOW kit or GLOW peptide kit, it provides the GLOW blend with the diluent and consumables needed to reconstitute it.\u003c\/p\u003e\n\u003cp\u003eThe GLOW Peptide Bundle pairs a 50mg vial of GHK-Cu, the copper-binding tripeptide also called copper peptide or copper tripeptide-1, with a 10mg vial of the BPC-157 + TB-500 blend, which contains 5mg of BPC-157, the pentadecapeptide derived from a protective protein in human gastric juice, and 5mg of TB-500, the synthetic form of the 43-amino-acid actin-binding protein thymosin beta-4. Researchers search for this set as the GLOW bundle, glow peptide bundle or GHK-Cu BPC-157 TB-500 bundle.\u003c\/p\u003e\n\u003cp\u003eThe three peptides are studied together in tissue-repair and skin research because they act on different layers of the healing process. GHK-Cu delivers copper to cells and modulates the expression of genes controlling collagen, glycosaminoglycan and metalloproteinase production in the extracellular matrix. BPC-157 is investigated for tendon, ligament, muscle and gut repair in rodent models, with proposed mechanisms involving nitric-oxide signalling and VEGFR2-driven angiogenesis. TB-500 sequesters G-actin through its LKKTET motif, promoting cell migration and angiogenesis.\u003c\/p\u003e\n\u003cp\u003eOmega Peptides Australia supplies both vials as high-purity (≥99% HPLC), COA-verified lyophilised powders, dispatched same day from within Australia on orders placed before 12pm, with the batch Certificate of Analysis for each vial available in the \u003ca href=\"\/pages\/certifications-of-analysis\"\u003eCOA library\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eWhat is included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × \u003ca href=\"\/products\/ghk-cu\"\u003eGHK-Cu\u003c\/a\u003e 50mg vial\u003c\/strong\u003e, lyophilised copper-peptide powder in a sealed sterile vial ($89.99 individually).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × \u003ca href=\"\/products\/bpc-157-tb500-blend\"\u003eBPC-157 + TB-500 blend\u003c\/a\u003e 10mg vial\u003c\/strong\u003e, 5mg BPC-157 and 5mg TB-500 co-lyophilised in a sealed sterile vial ($119.99 individually).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBacteriostatic water, syringes and swabs are not included in this bundle; the \u003ca href=\"\/products\/the-glow-bundle-bpc-157-tb-500-ghk-cu\"\u003eGLOW Starter Bundle\u003c\/a\u003e adds them.\u003c\/p\u003e\n\n\u003ch2\u003eKey research areas\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkin and collagen research (GHK-Cu).\u003c\/strong\u003e First isolated from human plasma by Loren Pickart in 1973, GHK-Cu stimulates collagen and glycosaminoglycan synthesis in fibroblast cultures and has been studied for wound contraction and angiogenesis in animal models. Gene-array studies report that it modulates a large number of human genes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTendon and ligament repair (BPC-157).\u003c\/strong\u003e In rodent tendon and ligament transection models, BPC-157 has been studied for fibroblast outgrowth and collagen organisation, with the FAK-paxillin pathway proposed as one route to increased fibroblast migration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngiogenesis and gut research (BPC-157).\u003c\/strong\u003e BPC-157 is studied for vessel formation in ischaemic tissue via VEGFR2 signalling and for protection of the gastrointestinal lining, reflecting its origin as a gastric-juice protein fragment that is stable in acid.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCell migration and wound closure (TB-500).\u003c\/strong\u003e As an actin-sequestering peptide, TB-500 regulates the cytoskeletal assembly required for keratinocyte, endothelial and fibroblast migration, and thymosin beta-4 has been investigated in dermal wound, corneal and cardiac injury models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCombined tissue-remodelling models.\u003c\/strong\u003e Laboratories pair the three compounds to study sequential phases of repair: early cell migration and vessel formation (TB-500 and BPC-157) followed by matrix deposition and remodelling (GHK-Cu).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhy these are supplied together\u003c\/h2\u003e\n\u003cp\u003eGHK-Cu and the BPC-157\/TB-500 blend address complementary questions in tissue-repair research. BPC-157 and TB-500 are typically studied in the early inflammatory and proliferative phases, where new vessels form and cells migrate into the wound bed, while GHK-Cu is studied in the later remodelling phase, where fibroblasts lay down collagen and the balance of metalloproteinases and their inhibitors determines the quality of the repaired matrix. Supplying the copper peptide alongside the blend covers all three phases with matched, batch-verified material.\u003c\/p\u003e\n\u003cp\u003eThe compounds are mechanistically distinct rather than redundant: GHK-Cu acts largely through copper delivery and transcriptional regulation, BPC-157 is linked to nitric-oxide and growth-factor-receptor signalling, and TB-500 works on actin dynamics inside the cell. Because the blend vial co-lyophilises BPC-157 and TB-500 in equal amounts, the bundle reduces the vials to reconstitute from three to two; the GLOW 70mg product goes further and pre-mixes all three in one vial.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBundle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGLOW Peptide Bundle (two research peptide vials)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGHK-Cu\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50mg lyophilised vial. Also known as copper peptide, copper tripeptide-1. CAS 89030-95-5. Formula C14H22CuN6O4. Molecular weight approx. 401.9 g\/mol (copper complex). Sequence Gly-His-Lys, copper-bound.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBPC-157\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5mg in the blend vial. Also known as BPC 157, Body Protection Compound. CAS 137525-51-0. Formula C62H98N16O22. Molecular weight 1419.5 g\/mol. Sequence GEPPPGKPADDAGLV.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTB-500\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5mg in the blend vial. Also known as thymosin beta-4, Tβ4, TB500. CAS 77591-33-4. Formula C212H350N56O78S. Molecular weight 4963.4 g\/mol. 43 amino acids.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCategory\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSkin and collagen research; tissue-repair research\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePurity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e≥99% HPLC for each peptide, batch COA supplied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eForm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLyophilised powder in sealed sterile vials\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBundle price\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e$189.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage (lyophilised)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2–8°C short term or −20°C long term, protect from light and moisture, avoid repeated freeze-thaw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage (reconstituted)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2–8°C, use within 28 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReconstitution\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBacteriostatic water (recommended, sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch2\u003eAvailable sizes and pricing\u003c\/h2\u003e\n\u003cp\u003eThe GLOW Peptide Bundle comes in one configuration. Bought separately, the GHK-Cu 50mg vial ($89.99) and the BPC-157\/TB-500 blend 10mg vial ($119.99) total $209.98, so the bundle saves about $20. Researchers who also need diluent and syringes should choose the \u003ca href=\"\/products\/the-glow-bundle-bpc-157-tb-500-ghk-cu\"\u003eGLOW Starter Bundle\u003c\/a\u003e at $229.99.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGLOW Peptide Bundle, $189.99 (about $3.17 per mg across 60mg of peptide; GHK-Cu alone is about $1.80 per mg and the blend about $12.00 per mg individually)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eQuality and COA verification\u003c\/h2\u003e\n\u003cp\u003eEvery batch of GHK-Cu and of the BPC-157\/TB-500 blend is tested independently by Janoshik Analytical: HPLC confirms purity at or above 99% and mass spectrometry confirms identity of each peptide, including both components of the blend. A Certificate of Analysis is issued for every batch and published in the \u003ca href=\"\/pages\/certifications-of-analysis\"\u003eCOA library\u003c\/a\u003e. Both vials are lyophilised and sealed for stability in storage and domestic transit, and orders are packed to protect the vials in the post.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently bought together\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bacteriostatic-water\"\u003eBacteriostatic Water (10mL)\u003c\/a\u003e, $29.99, the recommended diluent for reconstituting both vials.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ghk-cu-100mg\"\u003eGHK-Cu (100mg)\u003c\/a\u003e, $119.99, a larger vial at a lower per-mg cost for extended studies.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bpc-157-tb500-blend\"\u003eBPC-157 + TB-500 Blend (10mg)\u003c\/a\u003e, $119.99, a second blend vial for longer tissue-repair series.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/the-glow-bundle-bpc-157-tb-500-ghk-cu\"\u003eGLOW Starter Bundle\u003c\/a\u003e, $229.99, the same two vials with bacteriostatic water, syringes and swabs included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eResearch guides\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/ghk-cu-research-guide\"\u003eGHK-Cu research guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bpc-157-research-guide\"\u003eBPC-157 research guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bpc-157-vs-tb-500\"\u003eBPC-157 vs TB-500\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/ghk-cu-vs-bpc-157\"\u003eGHK-Cu vs BPC-157\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/best-place-to-buy-ghk-cu-australia\"\u003eBest place to buy GHK-Cu in Australia\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/news\/peptide-storage-guide-how-to-store-lyophilised-peptides-properly\"\u003ePeptide storage guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/news\/coa-testing-explained-research-peptides-australia\"\u003eCOA testing explained\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/research-calculator\"\u003ePeptide reconstitution calculator\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the GLOW Peptide Bundle?\u003c\/strong\u003e\u003cbr\u003eTwo lyophilised vials: one 50mg vial of GHK-Cu and one 10mg vial of the BPC-157 + TB-500 blend, which contains 5mg of BPC-157 and 5mg of TB-500 co-lyophilised together. Both are sealed sterile vials with batch-matched Certificates of Analysis. The bundle is $189.99 and does not include bacteriostatic water or syringes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are GHK-Cu, BPC-157 and TB-500?\u003c\/strong\u003e\u003cbr\u003eGHK-Cu is the tripeptide glycyl-histidyl-lysine complexed with copper, first isolated from human plasma and studied in skin, collagen and wound-healing research. BPC-157 is a 15-amino-acid fragment of a protective gastric-juice protein studied for tendon, ligament, muscle and gut repair in rodent models. TB-500 is the synthetic form of thymosin beta-4, a 43-amino-acid actin-binding protein studied for cell migration and tissue repair.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need bacteriostatic water and syringes?\u003c\/strong\u003e\u003cbr\u003eYes, and they are not included here. Both vials are dry lyophilised powder and must be reconstituted before any laboratory procedure. Bacteriostatic water, whose 0.9% benzyl alcohol inhibits bacterial growth across repeated punctures, is sold in 3mL ($14.99) and 10mL ($29.99) vials, and 1mL syringes in 5 and 10 packs. The GLOW Starter Bundle includes them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much do I save with the bundle?\u003c\/strong\u003e\u003cbr\u003ePurchased separately, GHK-Cu 50mg is $89.99 and the BPC-157\/TB-500 blend 10mg is $119.99, a total of $209.98. The GLOW Peptide Bundle is $189.99, a saving of about $20. Both vials come from current COA-verified batches and ship together in one tracked dispatch, which also avoids paying two separate shipping charges.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I buy the items separately?\u003c\/strong\u003e\u003cbr\u003eYes. GHK-Cu is listed in 50mg ($89.99) and 100mg ($119.99) vials, and the BPC-157 + TB-500 blend in a 10mg vial ($119.99). BPC-157 and TB-500 are also sold as single-compound vials for laboratories that want to vary the ratio rather than use the fixed 5mg + 5mg blend.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I buy GHK-Cu or BPC-157 at Chemist Warehouse or a pharmacy in Australia?\u003c\/strong\u003e\u003cbr\u003eNot in this form. Some cosmetic serums sold at Chemist Warehouse and other pharmacies list copper peptides as a topical ingredient, but those are cosmetics, not lyophilised research-grade GHK-Cu. BPC-157 and TB-500 are not registered medicines in Australia and are not stocked by Chemist Warehouse, Priceline or any retail pharmacy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan Australian compounding pharmacies supply GHK-Cu or BPC-157?\u003c\/strong\u003e\u003cbr\u003eNeither is a registered medicine. Some compounding pharmacies have prepared BPC-157 for individual patients against a prescription under the compounding exemption, though the TGA has flagged significant uncertainty about unapproved peptides. Any compounded preparation is a separate product from the research compounds Omega Peptides Australia supplies for in-vitro laboratory use only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do you reconstitute GHK-Cu and the BPC-157\/TB-500 blend?\u003c\/strong\u003e\u003cbr\u003eWipe both stoppers with an alcohol swab. Draw the required volume of bacteriostatic water into a 1mL syringe and add it slowly down the inside wall of the peptide vial, not onto the powder. Swirl gently until clear; never shake. Reconstituted GHK-Cu is a distinct blue solution. Label each vial, refrigerate at 2–8°C and use within 28 days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should the GLOW Peptide Bundle be stored?\u003c\/strong\u003e\u003cbr\u003eKeep the lyophilised vials sealed at 2–8°C short term or −20°C long term, protected from light and moisture, and avoid repeated freeze-thaw cycles. Once reconstituted, store both vials at 2–8°C and use within 28 days. GHK-Cu is light-sensitive, so keep the blue solution boxed between uses.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere can I buy GHK-Cu and BPC-157 in Australia?\u003c\/strong\u003e\u003cbr\u003eDirectly from Omega Peptides Australia. Stock is held domestically, orders placed before 12pm are dispatched the same day with tracked delivery, and every batch is supported by an independent Certificate of Analysis. The full range of vials, blends and kits is listed in the \u003ca href=\"\/collections\/research-peptides-australia\"\u003eresearch peptides collection\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the GLOW Peptide Bundle cost in Australia?\u003c\/strong\u003e\u003cbr\u003eThe GLOW Peptide Bundle is $189.99 for GHK-Cu 50mg and the BPC-157\/TB-500 blend 10mg, about $3.17 per mg across 60mg of peptide. Individually, GHK-Cu 50mg is $89.99 (about $1.80 per mg) and the blend is $119.99 (about $12.00 per mg). The GLOW Starter Bundle with supplies is $229.99.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I get the GLOW Peptide Bundle online in Australia?\u003c\/strong\u003e\u003cbr\u003eAdd the bundle to your cart from this page and complete checkout. Orders received before 12pm are dispatched the same business day from Australian stock, with tracked domestic shipping and discreet packaging that does not identify the contents. Tracking is emailed once the parcel is lodged.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre GHK-Cu, BPC-157 and TB-500 legal in Australia?\u003c\/strong\u003e\u003cbr\u003eOmega Peptides Australia supplies GHK-Cu, BPC-157 and TB-500 strictly for lawful in-vitro laboratory research. None of the three is approved by the TGA for human or veterinary use, and none is sold as a medicine or supplement. Purchasers are responsible for ensuring their intended use complies with all applicable laws.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the GLOW Peptide Bundle compare with the GLOW 70mg vial and the GLOW Starter Bundle?\u003c\/strong\u003e\u003cbr\u003eAll three contain GHK-Cu, BPC-157 and TB-500. This bundle supplies two vials, GHK-Cu 50mg and a 5mg + 5mg blend, for $189.99. The \u003ca href=\"\/products\/glow-70mg-research-peptide-pure-peptides-australia\"\u003eGLOW 70mg\u003c\/a\u003e vial pre-mixes GHK-Cu 50mg, BPC-157 10mg and TB-500 10mg in one vial for $139.99. The \u003ca href=\"\/products\/the-glow-bundle-bpc-157-tb-500-ghk-cu\"\u003eGLOW Starter Bundle\u003c\/a\u003e is this two-vial set plus bacteriostatic water, syringes and swabs for $229.99.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e⚠ For in-vitro research and laboratory use only. Not for human or veterinary use.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is in the GLOW Peptide Bundle?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Two lyophilised vials: one 50mg vial of GHK-Cu and one 10mg vial of the BPC-157 + TB-500 blend, which contains 5mg of BPC-157 and 5mg of TB-500 co-lyophilised together. Both are sealed sterile vials with batch-matched Certificates of Analysis. The bundle is $189.99 and does not include bacteriostatic water or syringes.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What are GHK-Cu, BPC-157 and TB-500?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"GHK-Cu is the tripeptide glycyl-histidyl-lysine complexed with copper, first isolated from human plasma and studied in skin, collagen and wound-healing research. BPC-157 is a 15-amino-acid fragment of a protective gastric-juice protein studied for tendon, ligament, muscle and gut repair in rodent models. TB-500 is the synthetic form of thymosin beta-4, a 43-amino-acid actin-binding protein studied for cell migration and tissue repair.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Do I need bacteriostatic water and syringes?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes, and they are not included here. Both vials are dry lyophilised powder and must be reconstituted before any laboratory procedure. Bacteriostatic water, whose 0.9% benzyl alcohol inhibits bacterial growth across repeated punctures, is sold in 3mL ($14.99) and 10mL ($29.99) vials, and 1mL syringes in 5 and 10 packs. The GLOW Starter Bundle includes them.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How much do I save with the bundle?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Purchased separately, GHK-Cu 50mg is $89.99 and the BPC-157\/TB-500 blend 10mg is $119.99, a total of $209.98. The GLOW Peptide Bundle is $189.99, a saving of about $20. Both vials come from current COA-verified batches and ship together in one tracked dispatch, which also avoids paying two separate shipping charges.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I buy the items separately?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. GHK-Cu is listed in 50mg ($89.99) and 100mg ($119.99) vials, and the BPC-157 + TB-500 blend in a 10mg vial ($119.99). BPC-157 and TB-500 are also sold as single-compound vials for laboratories that want to vary the ratio rather than use the fixed 5mg + 5mg blend.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I buy GHK-Cu or BPC-157 at Chemist Warehouse or a pharmacy in Australia?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Not in this form. Some cosmetic serums sold at Chemist Warehouse and other pharmacies list copper peptides as a topical ingredient, but those are cosmetics, not lyophilised research-grade GHK-Cu. BPC-157 and TB-500 are not registered medicines in Australia and are not stocked by Chemist Warehouse, Priceline or any retail pharmacy.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can Australian compounding pharmacies supply GHK-Cu or BPC-157?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Neither is a registered medicine. Some compounding pharmacies have prepared BPC-157 for individual patients against a prescription under the compounding exemption, though the TGA has flagged significant uncertainty about unapproved peptides. Any compounded preparation is a separate product from the research compounds Omega Peptides Australia supplies for in-vitro laboratory use only.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do you reconstitute GHK-Cu and the BPC-157\/TB-500 blend?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Wipe both stoppers with an alcohol swab. Draw the required volume of bacteriostatic water into a 1mL syringe and add it slowly down the inside wall of the peptide vial, not onto the powder. Swirl gently until clear; never shake. Reconstituted GHK-Cu is a distinct blue solution. Label each vial, refrigerate at 2-8 degrees Celsius and use within 28 days.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How should the GLOW Peptide Bundle be stored?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Keep the lyophilised vials sealed at 2-8 degrees Celsius short term or −20 degrees Celsius long term, protected from light and moisture, and avoid repeated freeze-thaw cycles. Once reconstituted, store both vials at 2-8 degrees Celsius and use within 28 days. GHK-Cu is light-sensitive, so keep the blue solution boxed between uses.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Where can I buy GHK-Cu and BPC-157 in Australia?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Directly from Omega Peptides Australia. Stock is held domestically, orders placed before 12pm are dispatched the same day with tracked delivery, and every batch is supported by an independent Certificate of Analysis. The full range of vials, blends and kits is listed in the research peptides collection.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the GLOW Peptide Bundle cost in Australia?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The GLOW Peptide Bundle is $189.99 for GHK-Cu 50mg and the BPC-157\/TB-500 blend 10mg, about $3.17 per mg across 60mg of peptide. Individually, GHK-Cu 50mg is $89.99 (about $1.80 per mg) and the blend is $119.99 (about $12.00 per mg). The GLOW Starter Bundle with supplies is $229.99.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I get the GLOW Peptide Bundle online in Australia?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Add the bundle to your cart from this page and complete checkout. Orders received before 12pm are dispatched the same business day from Australian stock, with tracked domestic shipping and discreet packaging that does not identify the contents. Tracking is emailed once the parcel is lodged.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Are GHK-Cu, BPC-157 and TB-500 legal in Australia?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Omega Peptides Australia supplies GHK-Cu, BPC-157 and TB-500 strictly for lawful in-vitro laboratory research. None of the three is approved by the TGA for human or veterinary use, and none is sold as a medicine or supplement. Purchasers are responsible for ensuring their intended use complies with all applicable laws.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does the GLOW Peptide Bundle compare with the GLOW 70mg vial and the GLOW Starter Bundle?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"All three contain GHK-Cu, BPC-157 and TB-500. This bundle supplies two vials, GHK-Cu 50mg and a 5mg + 5mg blend, for $189.99. The GLOW 70mg vial pre-mixes GHK-Cu 50mg, BPC-157 10mg and TB-500 10mg in one vial for $139.99. The GLOW Starter Bundle is this two-vial set plus bacteriostatic water, syringes and swabs for $229.99.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"Omega Peptides Australia","offers":[{"title":"Default Title","offer_id":43208937242686,"sku":"GLOW-PEPTIDE-BUNDLE","price":199.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/2123\/3470\/files\/GHK-Cu_BPC-157_TB-500_peptide.png?v=1787063560"},{"product_id":"the-glow-bundle-bpc-157-tb-500-ghk-cu","title":"GLOW Starter Bundle","description":"\u003ch2\u003eGLOW Starter Bundle — GHK-Cu + BPC-157\/TB-500 Blend + Lab Supplies Kit\u003c\/h2\u003e\n\u003cp\u003eGLOW Starter Bundle is supplied in Australia by Omega Peptides Australia from domestic stock, with same-day dispatch on orders placed before 12pm. Also searched as GLOW starter kit or GHK-Cu BPC-157 TB-500 bundle, it provides separate GHK-Cu, BPC-157 and TB-500 vials with the consumables to run them.\u003c\/p\u003e\n\u003cp\u003eThe GLOW Starter Bundle is the supplies-included version of the GLOW combination: a 50mg vial of GHK-Cu, the copper tripeptide glycyl-histidyl-lysine complexed with copper and often called copper peptide, and a 10mg vial of the BPC-157 + TB-500 blend, holding 5mg of BPC-157, the gastric-juice-derived pentadecapeptide, and 5mg of TB-500, the synthetic form of thymosin beta-4. Packed with the two vials are bacteriostatic water, ten 1mL insulin syringes and four alcohol swabs. Researchers search for it as the GLOW starter bundle or a glow kit with supplies.\u003c\/p\u003e\n\u003cp\u003eAll three peptides are studied in tissue-repair, skin and collagen research, each through a different mechanism. GHK-Cu carries copper into cells and regulates genes governing collagen synthesis, matrix metalloproteinases and their inhibitors. BPC-157 is investigated in rodent models of tendon, ligament, muscle and gastrointestinal injury, with nitric-oxide modulation and VEGFR2-mediated angiogenesis among the proposed pathways. TB-500 binds monomeric actin through its LKKTET motif and is studied for cell migration and wound closure.\u003c\/p\u003e\n\u003cp\u003eOmega Peptides Australia supplies both peptide vials as high-purity (≥99% HPLC), COA-verified lyophilised powders, dispatched same day from within Australia on orders placed before 12pm, with the batch Certificate of Analysis for each vial published in the \u003ca href=\"\/pages\/certifications-of-analysis\"\u003eCOA library\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat is included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × \u003ca href=\"\/products\/ghk-cu\"\u003eGHK-Cu\u003c\/a\u003e 50mg vial\u003c\/strong\u003e, lyophilised copper-peptide powder in a sealed sterile vial ($89.99 individually).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × \u003ca href=\"\/products\/bpc-157-tb500-blend\"\u003eBPC-157 + TB-500 blend\u003c\/a\u003e 10mg vial\u003c\/strong\u003e, 5mg BPC-157 and 5mg TB-500 co-lyophilised in a sealed sterile vial ($119.99 individually).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × \u003ca href=\"\/products\/bacteriostatic-water\"\u003ebacteriostatic water\u003c\/a\u003e vial\u003c\/strong\u003e, sterile water preserved with 0.9% benzyl alcohol for reconstitution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 × 1mL \u003ca href=\"\/products\/1ml-insulin-needles\"\u003einsulin syringes\u003c\/a\u003e\u003c\/strong\u003e, individually sealed, fixed needle, tamper-evident cap (10 pack $19.99 individually).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 × alcohol swabs\u003c\/strong\u003e for cleaning vial stoppers before each puncture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKey research areas\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDermal collagen and skin remodelling (GHK-Cu).\u003c\/strong\u003e Isolated from human plasma by Loren Pickart in 1973, GHK-Cu increases collagen and glycosaminoglycan production in fibroblast cultures and has been studied for wound contraction and angiogenesis in animal models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGene expression (GHK-Cu).\u003c\/strong\u003e Gene-array analyses report that GHK-Cu shifts the expression of a large number of human genes, including tissue-remodelling enzymes, decorin and growth factors such as VEGF.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMusculoskeletal repair (BPC-157).\u003c\/strong\u003e BPC-157 is studied in rodent tendon, ligament and muscle injury models, where proposed mechanisms include FAK-paxillin signalling in fibroblasts and upregulation of growth-factor receptors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGut protection and angiogenesis (BPC-157).\u003c\/strong\u003e Derived from a protective protein in human gastric juice and stable in acid, BPC-157 is investigated for protection of the gastrointestinal lining and for new vessel formation through VEGFR2 signalling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActin dynamics and cell migration (TB-500).\u003c\/strong\u003e As a G-actin-sequestering peptide, TB-500 regulates the cytoskeletal changes that let keratinocytes, endothelial cells and fibroblasts migrate into a wound bed; thymosin beta-4 has been studied in dermal and corneal injury models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy these are supplied together\u003c\/h2\u003e\n\u003cp\u003eThe GLOW Starter Bundle exists so that a laboratory can begin work with the GLOW combination from a single parcel. Both peptide vials are dry lyophilised powder that cannot be used until reconstituted, so the bundle includes the diluent, measuring tools and swabs needed to do that cleanly. Bacteriostatic water is used rather than plain sterile water because its 0.9% benzyl alcohol suppresses bacterial growth across the repeated punctures a multi-use vial receives; once punctured it is kept for 28 days. The 1mL syringes are graduated finely enough to measure small volumes accurately, and each is individually sealed.\u003c\/p\u003e\n\u003cp\u003eThe peptides themselves are paired for a research reason. BPC-157 and TB-500 are typically studied in the early phases of repair, when cells migrate and vessels form, while GHK-Cu is studied in the later remodelling phase, when collagen is deposited and the matrix reorganised. The blend vial co-lyophilises BPC-157 and TB-500 in equal amounts so only two vials need reconstituting, and GHK-Cu is kept separate because its copper complex is best handled on its own.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBundle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGLOW Starter Bundle (two peptide vials plus laboratory supplies)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGHK-Cu\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50mg lyophilised vial. Also known as copper peptide, copper tripeptide-1. CAS 89030-95-5. Formula C14H22CuN6O4. Molecular weight approx. 401.9 g\/mol (copper complex). Sequence Gly-His-Lys, copper-bound.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBPC-157\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5mg in the blend vial. Also known as BPC 157, Body Protection Compound. CAS 137525-51-0. Formula C62H98N16O22. Molecular weight 1419.5 g\/mol. Sequence GEPPPGKPADDAGLV.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTB-500\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5mg in the blend vial. Also known as thymosin beta-4, Tβ4, TB500. CAS 77591-33-4. Formula C212H350N56O78S. Molecular weight 4963.4 g\/mol. 43 amino acids.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCategory\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSkin and collagen research; tissue-repair research; lab supplies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePurity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e≥99% HPLC for each peptide, batch COA supplied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eForm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLyophilised powder in sealed sterile vials\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLab supplies\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 × bacteriostatic water (0.9% benzyl alcohol); 10 × 1mL insulin syringes; 4 × alcohol swabs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBundle price\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e$229.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage (lyophilised)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2–8°C short term or −20°C long term, protect from light and moisture, avoid repeated freeze-thaw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage (reconstituted)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2–8°C, use within 28 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReconstitution\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBacteriostatic water (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eAvailable sizes and pricing\u003c\/h2\u003e\n\u003cp\u003eThe GLOW Starter Bundle comes in one configuration at $229.99. The two peptide vials alone cost $209.98 separately, and a 10 pack of 1mL syringes adds $19.99 for a total of $229.97, so the bacteriostatic water and swabs are effectively included at no extra cost. Researchers who already hold supplies can choose the \u003ca href=\"\/products\/glow-bundle\"\u003eGLOW Peptide Bundle\u003c\/a\u003e, the same two vials without supplies, at $189.99.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGLOW Starter Bundle, $229.99 (60mg of peptide across two vials; about $1.80 per mg for GHK-Cu and $12.00 per mg for the blend individually, supplies included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eQuality and COA verification\u003c\/h2\u003e\n\u003cp\u003eEvery batch of GHK-Cu and of the BPC-157\/TB-500 blend is tested independently by Janoshik Analytical, with HPLC confirming purity at or above 99% and mass spectrometry confirming the identity of each peptide, including both components of the blend. A Certificate of Analysis is issued for every batch and published in the \u003ca href=\"\/pages\/certifications-of-analysis\"\u003eCOA library\u003c\/a\u003e. Both peptides are lyophilised in sealed sterile vials for stability in storage and domestic transit, and the kit is packed with the diluent and syringes secured separately.\u003c\/p\u003e\n\u003ch2\u003eFrequently bought together\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/glow-bundle\"\u003eGLOW Peptide Bundle\u003c\/a\u003e, $189.99, the same two vials without supplies.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ghk-cu-100mg\"\u003eGHK-Cu (100mg)\u003c\/a\u003e, $119.99, a larger copper-peptide vial at a lower per-mg cost.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bpc-157-tb500-blend\"\u003eBPC-157 + TB-500 Blend (10mg)\u003c\/a\u003e, $119.99, a second blend vial for longer tissue-repair series.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bacteriostatic-water\"\u003eBacteriostatic Water (10mL)\u003c\/a\u003e, $29.99, a spare diluent vial for repeat reconstitutions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResearch guides\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/ghk-cu-research-guide\"\u003eGHK-Cu research guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bpc-157-research-guide\"\u003eBPC-157 research guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bpc-157-vs-tb-500\"\u003eBPC-157 vs TB-500\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/ghk-cu-vs-bpc-157\"\u003eGHK-Cu vs BPC-157\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/best-place-to-buy-bpc-157-australia\"\u003eBest place to buy BPC-157 in Australia\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/news\/peptide-storage-guide-how-to-store-lyophilised-peptides-properly\"\u003ePeptide storage guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/news\/coa-testing-explained-research-peptides-australia\"\u003eCOA testing explained\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/research-calculator\"\u003ePeptide reconstitution calculator\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the GLOW Starter Bundle?\u003c\/strong\u003e\u003cbr\u003eOne 50mg vial of GHK-Cu and one 10mg vial of the BPC-157 + TB-500 blend (5mg of each), both lyophilised in sealed sterile vials, plus a vial of bacteriostatic water, ten 1mL insulin syringes and four alcohol swabs, for $229.99. The \u003ca href=\"\/products\/glow-bundle\"\u003eGLOW Peptide Bundle\u003c\/a\u003e at $189.99 is the same two vials without the water, syringes and swabs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are GHK-Cu, BPC-157 and TB-500?\u003c\/strong\u003e\u003cbr\u003eGHK-Cu is the tripeptide glycyl-histidyl-lysine bound to copper, first isolated from human plasma and studied in skin, collagen and wound-healing research. BPC-157 is a 15-amino-acid fragment of a protective gastric-juice protein studied for tendon, ligament, muscle and gut repair in rodent models. TB-500 is the synthetic form of thymosin beta-4, a 43-amino-acid actin-binding protein studied for cell migration and tissue repair.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need bacteriostatic water and syringes?\u003c\/strong\u003e\u003cbr\u003eYes, and this bundle includes them. Both peptide vials are dry lyophilised powder that must be reconstituted before any laboratory procedure. Bacteriostatic water is preferred to plain sterile water because its 0.9% benzyl alcohol inhibits bacterial growth across repeated punctures, and the sealed 1mL syringes measure small volumes accurately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much do I save with the bundle?\u003c\/strong\u003e\u003cbr\u003eThe GHK-Cu 50mg vial ($89.99), the BPC-157\/TB-500 blend ($119.99) and a 10 pack of 1mL syringes ($19.99) cost $229.97 separately. The GLOW Starter Bundle is $229.99, so the bacteriostatic water and alcohol swabs come at no additional cost, and every component arrives from current COA-verified batches in a single tracked dispatch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I buy the items separately?\u003c\/strong\u003e\u003cbr\u003eYes. GHK-Cu is listed in 50mg and 100mg vials, the BPC-157 + TB-500 blend in a 10mg vial, bacteriostatic water in 3mL and 10mL vials, and 1mL syringes in 5 and 10 packs. BPC-157 and TB-500 are also sold as single-compound vials for laboratories that want to vary the ratio.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I buy GHK-Cu or BPC-157 at Chemist Warehouse or a pharmacy in Australia?\u003c\/strong\u003e\u003cbr\u003eNot in this form. Cosmetic serums sold at Chemist Warehouse and other pharmacies may list copper peptides as a topical ingredient, but those are cosmetics rather than lyophilised research-grade GHK-Cu. BPC-157 and TB-500 are not registered medicines in Australia and are not stocked by Chemist Warehouse, Priceline or any retail pharmacy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan Australian compounding pharmacies supply GHK-Cu or BPC-157?\u003c\/strong\u003e\u003cbr\u003eNeither is a registered medicine. Some compounding pharmacies have prepared BPC-157 for individual patients against a prescription under the compounding exemption, although the TGA has flagged significant uncertainty about unapproved peptides. Any compounded preparation is a separate product from the research compounds Omega Peptides Australia supplies for in-vitro laboratory use only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do you reconstitute the peptides in the GLOW Starter Bundle?\u003c\/strong\u003e\u003cbr\u003eSwab both stoppers. Draw the required volume of bacteriostatic water into a 1mL syringe and add it slowly down the inside wall of the peptide vial, not directly onto the powder. Swirl gently until clear; never shake. GHK-Cu dissolves to a distinct blue solution. Label each vial, refrigerate at 2–8°C and use within 28 days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should the GLOW Starter Bundle be stored?\u003c\/strong\u003e\u003cbr\u003eKeep the lyophilised vials sealed at 2–8°C short term or −20°C long term, protected from light and moisture, and avoid repeated freeze-thaw cycles. Once reconstituted, store both vials at 2–8°C and use within 28 days. Bacteriostatic water is kept at room temperature and discarded 28 days after the first puncture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere can I buy GHK-Cu and BPC-157 in Australia?\u003c\/strong\u003e\u003cbr\u003eDirectly from Omega Peptides Australia. Stock is held domestically, orders placed before 12pm are dispatched the same day with tracked delivery, and every batch is supported by an independent Certificate of Analysis. The full range of vials, blends and kits is listed in the \u003ca href=\"\/collections\/research-peptides-australia\"\u003eresearch peptides collection\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the GLOW Starter Bundle cost in Australia?\u003c\/strong\u003e\u003cbr\u003eThe GLOW Starter Bundle is $229.99 for GHK-Cu 50mg, the BPC-157\/TB-500 blend 10mg, bacteriostatic water, ten syringes and four swabs. Individually, GHK-Cu 50mg is $89.99 (about $1.80 per mg) and the blend is $119.99 (about $12.00 per mg). The GLOW Peptide Bundle without supplies is $189.99.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I get the GLOW Starter Bundle online in Australia?\u003c\/strong\u003e\u003cbr\u003eAdd the bundle to your cart from this page and complete checkout. Orders received before 12pm are dispatched the same business day from Australian stock, with tracked domestic shipping and discreet packaging that does not identify the contents. Tracking is emailed once the parcel is lodged.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre GHK-Cu, BPC-157 and TB-500 legal in Australia?\u003c\/strong\u003e\u003cbr\u003eOmega Peptides Australia supplies GHK-Cu, BPC-157 and TB-500 strictly for lawful in-vitro laboratory research. None of the three is approved by the TGA for human or veterinary use, and none is sold as a medicine or supplement. Purchasers are responsible for ensuring their intended use complies with all applicable laws.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e⚠ For in-vitro research and laboratory use only. Not for human or veterinary use.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Omega Peptides Australia","offers":[{"title":"Default Title","offer_id":43208938684478,"sku":"GLOW-STARTER-BUNDLE","price":219.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/2123\/3470\/files\/GHK-Cu_BPC-157_TB-500_peptide_bundle.jpg?v=1787063569"},{"product_id":"melanotan-ii-starter-kit","title":"Melanotan II Starter Kit","description":"\u003ch2\u003eMelanotan II Starter Kit — Research Peptide + Lab Supplies Bundle\u003c\/h2\u003e\n\u003cp\u003eMelanotan II Starter Kit is supplied in Australia by Omega Peptides Australia from domestic stock, with same-day dispatch on orders placed before 12pm. Also searched as MT2 kit or melanotan 2 kit, it provides Melanotan II with the diluent and consumables needed to reconstitute it.\u003c\/p\u003e\n\u003cp\u003eThe Melanotan II Starter Kit combines a 10mg vial of Melanotan II with the diluent and consumables needed to reconstitute it and handle the solution in a laboratory: a 10mL vial of bacteriostatic water, five sterile 1mL syringes and two alcohol swabs. It is often searched for as the melanotan starter kit, MT2 kit or melanotan 2 bundle, and it lets a first order for melanocortin research arrive as one matched set.\u003c\/p\u003e\n\u003cp\u003eMelanotan II is a synthetic cyclic heptapeptide analogue of alpha-melanocyte-stimulating hormone, written in full as Ac-Nle-cyclo[Asp-His-D-Phe-Arg-Trp-Lys]-NH2. It is studied for melanogenesis and pigmentation, for melanocortin signalling in central sexual-function circuits, and for MC4R-mediated appetite regulation. It is a non-selective agonist at MC1R, MC3R, MC4R and MC5R that raises cyclic AMP; the full mechanism is on the \u003ca href=\"\/products\/melanotan-ii-10mg\"\u003eMelanotan II product page\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eOmega Peptides Australia supplies the peptide in this kit as a high-purity (≥99% HPLC) COA-verified lyophilised powder in a sealed sterile vial. Kits are dispatched the same day from within Australia on orders placed before 12pm, and the batch Certificate of Analysis is published in our \u003ca href=\"\/pages\/certifications-of-analysis\"\u003eCOA library\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eWhat is included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × Melanotan II 10mg vial\u003c\/strong\u003e Lyophilised powder, ≥99% by HPLC, sealed sterile vial with batch COA. Sold separately at $79.99.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × Bacteriostatic water 10mL\u003c\/strong\u003e Sterile water with 0.9% benzyl alcohol preservative in a resealable multi-puncture vial. Sold separately at $29.99.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 × 1mL sterile syringes\u003c\/strong\u003e Fixed-needle, Luer-style, individually sealed, single-use, graduated for accurate small-volume transfer. A 5-pack is sold separately at $15.99.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 × alcohol swabs\u003c\/strong\u003e Individually wrapped, for wiping vial septa before each puncture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey research areas\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMelanogenesis and pigmentation\u003c\/strong\u003e Activation of MC1R on melanocytes raises cAMP, up-regulates MITF and increases tyrosinase activity, shifting melanin synthesis towards eumelanin, a pathway examined in cultured melanocytes and preclinical models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentral melanocortin signalling\u003c\/strong\u003e Melanotan II activates MC3R and MC4R in the hypothalamus. Preclinical work and early clinical investigations in the 1990s linked this to erectile responses, which led to the development of bremelanotide (PT-141).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAppetite and energy balance\u003c\/strong\u003e In rodent models, central administration reduces food intake through MC4R, so the compound serves as a tool agonist in leptin-POMC-MC4R research.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhy these are supplied together\u003c\/h2\u003e\n\u003cp\u003eA lyophilised peptide cannot be used in an experiment until it is dissolved, and the choice of diluent matters. Bacteriostatic water is sterile water with 0.9% benzyl alcohol added; the preservative inhibits bacterial growth, which allows the same diluent vial to be drawn from repeatedly for 28 days after first puncture. Plain sterile water has no preservative and is meant for single use, so pairing Melanotan II with bacteriostatic water gives a solution that can be refrigerated and sampled across a series of in-vitro experiments.\u003c\/p\u003e\n\u003cp\u003eThe syringes and swabs close the loop. Reconstitution needs a measured volume of diluent transferred into the peptide vial, and later samples must be drawn accurately; a graduated 1mL syringe reads to 0.01mL. Swabbing the septum before each puncture reduces the chance of contaminating either vial. Supplying all four together means the components are matched, in date, and cheaper than bought separately.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eKit\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMelanotan II Starter Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAlso known as\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMelanotan starter kit, MT2 kit, melanotan 2 bundle, melanotan 2 kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePeptide component\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMelanotan II 10mg, CAS 121062-08-6, C50H69N15O9, 1024.18 g\/mol, ≥99% HPLC, batch COA supplied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDiluent component\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBacteriostatic water 10mL, sterile water with 0.9% benzyl alcohol (CAS 100-51-6), resealable vial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSyringe component\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 × 1mL fixed-needle sterile syringes, individually sealed, single-use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSwab component\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 × individually wrapped alcohol swabs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBundle price\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e$109.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage (lyophilised peptide)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2–8°C short term or −20°C long term, protect from light and moisture, avoid repeated freeze-thaw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage (reconstituted peptide)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2–8°C, use within 28 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage (bacteriostatic water)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRoom temperature (20–25°C) before opening; use within 28 days of first puncture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReconstitution\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBacteriostatic water (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eAvailable sizes and pricing\u003c\/h2\u003e\n\u003cp\u003eThe kit is sold as a single bundle at $109.99. Bought individually, the three priced components come to $125.97 (Melanotan II 10mg at $79.99, bacteriostatic water 10mL at $29.99 and a 5-pack of 1mL syringes at $15.99), so the kit saves $15.98 before the swabs are counted. The \u003ca href=\"\/products\/retatrutide-melanotan-starter-kit\"\u003eRetatrutide + Melanotan 2 Starter Bundle\u003c\/a\u003e adds a second peptide; all bundles are in the \u003ca href=\"\/collections\/kits-and-bundles\"\u003ekits and bundles collection\u003c\/a\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMelanotan II Starter Kit — $109.99 (components valued at $125.97 separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eQuality and COA verification\u003c\/h2\u003e\n\u003cp\u003eThe Melanotan II vial in every kit comes from a batch tested independently by Janoshik Analytical before release. HPLC measures purity against the ≥99% specification and mass spectrometry confirms the molecular mass matches the compound, so identity and purity are both verified. A Certificate of Analysis for each batch is published in our \u003ca href=\"\/pages\/certifications-of-analysis\"\u003eCOA library\u003c\/a\u003e, matched to the batch number on the vial. The peptide is lyophilised and sealed in a sterile vial, the water and syringes are sterile and individually sealed, and the kit is cushioned for domestic transit.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently bought together\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/melanotan-i\"\u003eMelanotan I (10mg)\u003c\/a\u003e — $69.99, the linear MC1R-preferring analogue for side-by-side selectivity comparisons\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/melanotan-ii-10mg\"\u003eMelanotan II (10mg)\u003c\/a\u003e — $79.99, an additional vial for extended experimental series\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bacteriostatic-water\"\u003eBacteriostatic Water (3mL)\u003c\/a\u003e — $14.99, a spare small diluent vial\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/1ml-insulin-needles\"\u003e1mL Insulin Syringes (10 Pack)\u003c\/a\u003e — $19.99, extra sterile syringes beyond the five included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eResearch guides\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/news\/peptide-storage-guide-how-to-store-lyophilised-peptides-properly\"\u003ePeptide storage guide: how to store lyophilised peptides properly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/news\/coa-testing-explained-research-peptides-australia\"\u003eCOA testing explained: how research peptides are verified\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/research-calculator\"\u003ePeptide reconstitution calculator\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/certifications-of-analysis\"\u003eCertificates of Analysis library\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the Melanotan II Starter Kit?\u003c\/strong\u003e\u003cbr\u003eThe kit contains one 10mg vial of lyophilised Melanotan II, one 10mL vial of bacteriostatic water (0.9% benzyl alcohol), five individually sealed sterile 1mL fixed-needle syringes and two alcohol swabs. Everything needed to reconstitute the peptide and handle the solution in a laboratory arrives in one parcel with the batch COA.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is Melanotan II?\u003c\/strong\u003e\u003cbr\u003eMelanotan II is a synthetic cyclic heptapeptide derived from alpha-melanocyte-stimulating hormone, first synthesised at the University of Arizona in the 1980s. It is a non-selective melanocortin agonist active at MC1R, MC3R, MC4R and MC5R, studied in pigmentation, sexual-function and appetite research, and supplied here strictly for in-vitro laboratory use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need bacteriostatic water and syringes?\u003c\/strong\u003e\u003cbr\u003eYes, for laboratory handling. The peptide is a dry lyophilised powder and must be dissolved before any experiment; bacteriostatic water is the recommended diluent because its 0.9% benzyl alcohol keeps the vial usable for 28 days. Sterile 1mL syringes transfer a measured volume of diluent into the vial and draw accurate samples.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much do I save with the bundle?\u003c\/strong\u003e\u003cbr\u003eThe kit costs $109.99. The same Melanotan II 10mg vial is $79.99 on its own, the 10mL bacteriostatic water is $29.99 and a 5-pack of 1mL syringes is $15.99, which totals $125.97, so the bundle saves $15.98 on the priced items. The two alcohol swabs are included on top.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I buy the items separately?\u003c\/strong\u003e\u003cbr\u003eYes. Melanotan II 10mg, bacteriostatic water in 3mL and 10mL sizes, and 1mL sterile syringes in 5-packs and 10-packs are each listed as individual products, so you can top up any component without re-buying the kit. The bundle is simply the cheaper way to get a matched first set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I buy Melanotan II at Chemist Warehouse or a pharmacy in Australia?\u003c\/strong\u003e\u003cbr\u003eNo. The TGA classifies Melanotan II as a prescription-only substance, but no products containing it are on the Australian Register of Therapeutic Goods, so Chemist Warehouse, Priceline and other retail pharmacies do not stock it, and the TGA has warned repeatedly about melanotan tanning products. The compound in this kit is a laboratory reagent, not a medicine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan Australian compounding pharmacies supply Melanotan II?\u003c\/strong\u003e\u003cbr\u003eCompounding pharmacies in Australia prepare medicines only for an individual patient on a practitioner's prescription and do not sell peptides to the public. Research suppliers such as Omega Peptides Australia supply the lyophilised research compound for laboratory use, a separate category.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do you reconstitute Melanotan II?\u003c\/strong\u003e\u003cbr\u003eWipe both septa with a swab, draw the required volume of bacteriostatic water into a syringe, pierce the peptide vial and let the water run slowly down the inside wall rather than onto the powder. Swirl gently until clear; never shake. Refrigerate the reconstituted vial at 2–8°C and use it within 28 days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should Melanotan II be stored?\u003c\/strong\u003e\u003cbr\u003eKeep the lyophilised vial at 2–8°C short term or −20°C long term, protected from light and moisture, and avoid repeated freeze-thaw cycles. Once reconstituted, store the solution at 2–8°C and use it within 28 days. The bacteriostatic water can be kept at room temperature before opening and used within 28 days of first puncture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere can I buy the Melanotan II Starter Kit in Australia?\u003c\/strong\u003e\u003cbr\u003eOmega Peptides Australia holds the kit in domestic stock and ships from within Australia. Orders placed before 12pm are dispatched the same day, the peptide vial carries an independent COA, and the full range is in our \u003ca href=\"\/collections\/research-peptides-australia\"\u003eresearch peptides collection\u003c\/a\u003e. We do not supply Melanotan II for human use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the Melanotan II Starter Kit cost in Australia?\u003c\/strong\u003e\u003cbr\u003eThe kit is $109.99 in Australian dollars, covering a 10mg Melanotan II vial (about $8.00 per mg when bought alone at $79.99), 10mL of bacteriostatic water, five 1mL syringes and two alcohol swabs. That is $15.98 less than the $125.97 the priced components cost individually, with the batch COA included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I get the Melanotan II Starter Kit online in Australia?\u003c\/strong\u003e\u003cbr\u003eAdd the kit to your cart on this page and check out. Orders placed before 12pm are dispatched the same business day from our Australian facility with tracked domestic shipping. Packaging is plain and discreet, the vials are cushioned, and a tracking number is emailed once the parcel is collected.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs Melanotan II legal in Australia?\u003c\/strong\u003e\u003cbr\u003eOmega Peptides Australia supplies Melanotan II strictly for lawful in-vitro laboratory research. It is not approved by the TGA for human or veterinary use and is not sold as a medicine or supplement. Purchasers are responsible for ensuring their intended use complies with all applicable laws.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does the bacteriostatic water last after the first puncture?\u003c\/strong\u003e\u003cbr\u003eTwenty-eight days. The 0.9% benzyl alcohol inhibits bacterial growth, which is what makes a multi-puncture vial possible, but the preservative is not indefinite and each puncture carries a small contamination risk. Record the date of first use, wipe the septum before every draw, and discard the vial after 28 days or if it turns cloudy.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e⚠ For in-vitro research and laboratory use only. Not for human or veterinary use.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is in the Melanotan II Starter Kit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The kit contains one 10mg vial of lyophilised Melanotan II, one 10mL vial of bacteriostatic water (0.9% benzyl alcohol), five individually sealed sterile 1mL fixed-needle syringes and two alcohol swabs. Everything needed to reconstitute the peptide and handle the solution in a laboratory arrives in one parcel with the batch COA.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is Melanotan II?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Melanotan II is a synthetic cyclic heptapeptide derived from alpha-melanocyte-stimulating hormone, first synthesised at the University of Arizona in the 1980s. It is a non-selective melanocortin agonist active at MC1R, MC3R, MC4R and MC5R, studied in pigmentation, sexual-function and appetite research, and supplied here strictly for in-vitro laboratory use.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Do I need bacteriostatic water and syringes?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes, for laboratory handling. The peptide is a dry lyophilised powder and must be dissolved before any experiment; bacteriostatic water is the recommended diluent because its 0.9% benzyl alcohol keeps the vial usable for 28 days. Sterile 1mL syringes transfer a measured volume of diluent into the vial and draw accurate samples.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How much do I save with the bundle?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The kit costs $109.99. The same Melanotan II 10mg vial is $79.99 on its own, the 10mL bacteriostatic water is $29.99 and a 5-pack of 1mL syringes is $15.99, which totals $125.97, so the bundle saves $15.98 on the priced items. The two alcohol swabs are included on top.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I buy the items separately?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Melanotan II 10mg, bacteriostatic water in 3mL and 10mL sizes, and 1mL sterile syringes in 5-packs and 10-packs are each listed as individual products, so you can top up any component without re-buying the kit. The bundle is simply the cheaper way to get a matched first set.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I buy Melanotan II at Chemist Warehouse or a pharmacy in Australia?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"No. The TGA classifies Melanotan II as a prescription-only substance, but no products containing it are on the Australian Register of Therapeutic Goods, so Chemist Warehouse, Priceline and other retail pharmacies do not stock it, and the TGA has warned repeatedly about melanotan tanning products. The compound in this kit is a laboratory reagent, not a medicine.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can Australian compounding pharmacies supply Melanotan II?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Compounding pharmacies in Australia prepare medicines only for an individual patient on a practitioner's prescription and do not sell peptides to the public. Research suppliers such as Omega Peptides Australia supply the lyophilised research compound for laboratory use, a separate category.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do you reconstitute Melanotan II?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Wipe both septa with a swab, draw the required volume of bacteriostatic water into a syringe, pierce the peptide vial and let the water run slowly down the inside wall rather than onto the powder. Swirl gently until clear; never shake. Refrigerate the reconstituted vial at 2-8 degrees Celsius and use it within 28 days.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How should Melanotan II be stored?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Keep the lyophilised vial at 2-8 degrees Celsius short term or −20 degrees Celsius long term, protected from light and moisture, and avoid repeated freeze-thaw cycles. Once reconstituted, store the solution at 2-8 degrees Celsius and use it within 28 days. The bacteriostatic water can be kept at room temperature before opening and used within 28 days of first puncture.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Where can I buy the Melanotan II Starter Kit in Australia?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Omega Peptides Australia holds the kit in domestic stock and ships from within Australia. Orders placed before 12pm are dispatched the same day, the peptide vial carries an independent COA, and the full range is in our research peptides collection. We do not supply Melanotan II for human use.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the Melanotan II Starter Kit cost in Australia?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The kit is $109.99 in Australian dollars, covering a 10mg Melanotan II vial (about $8.00 per mg when bought alone at $79.99), 10mL of bacteriostatic water, five 1mL syringes and two alcohol swabs. That is $15.98 less than the $125.97 the priced components cost individually, with the batch COA included.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I get the Melanotan II Starter Kit online in Australia?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Add the kit to your cart on this page and check out. Orders placed before 12pm are dispatched the same business day from our Australian facility with tracked domestic shipping. Packaging is plain and discreet, the vials are cushioned, and a tracking number is emailed once the parcel is collected.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is Melanotan II legal in Australia?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Omega Peptides Australia supplies Melanotan II strictly for lawful in-vitro laboratory research. It is not approved by the TGA for human or veterinary use and is not sold as a medicine or supplement. Purchasers are responsible for ensuring their intended use complies with all applicable laws.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How long does the bacteriostatic water last after the first puncture?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Twenty-eight days. The 0.9% benzyl alcohol inhibits bacterial growth, which is what makes a multi-puncture vial possible, but the preservative is not indefinite and each puncture carries a small contamination risk. Record the date of first use, wipe the septum before every draw, and discard the vial after 28 days or if it turns cloudy.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"Omega Peptides Australia","offers":[{"title":"Default Title","offer_id":43208938782782,"sku":"MELANOTAN-II-KIT","price":109.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/2123\/3470\/files\/Melanotan_starter_kit_Australia_MT2_vial_syringes_bacteriostatic_water.jpg?v=1787063571"},{"product_id":"limitless-bundle","title":"Semax and Selank Bundle","description":"\u003ch2\u003eSemax and Selank Bundle — Nootropic Research Peptide Pair + Lab Supplies\u003c\/h2\u003e\n\u003cp\u003eSemax + Selank Bundle is supplied in Australia by Omega Peptides Australia from domestic stock, with same-day dispatch on orders placed before 12pm. Also searched as Semax Selank kit or nootropic peptide bundle, it provides Semax and Selank together with the consumables needed to run both.\u003c\/p\u003e\n\u003cp\u003eThe Semax and Selank Bundle, also called the Limitless Bundle, pairs the two best-known Russian nootropic heptapeptides with the consumables needed to reconstitute and handle them. Semax (Met-Glu-His-Phe-Pro-Gly-Pro) is an analogue of the ACTH(4-10) fragment, and Selank (Thr-Lys-Pro-Arg-Pro-Gly-Pro) is an analogue of the immune peptide tuftsin. Both were developed at the Institute of Molecular Genetics of the Russian Academy of Sciences and share a C-terminal Pro-Gly-Pro tail added to slow enzymatic breakdown. The kit is also searched for as a Semax Selank bundle or semax and selank kit.\u003c\/p\u003e\n\u003cp\u003eSemax is studied for attention, memory and neuroprotection through BDNF, melanocortin and enkephalin pathways, while Selank is studied for anxiety, stress and immune endpoints through GABAergic and enkephalin mechanisms. The two are frequently investigated side by side because their profiles are complementary rather than overlapping.\u003c\/p\u003e\n\u003cp\u003eOmega Peptides Australia supplies both peptides as high-purity (≥99% HPLC) COA-verified lyophilised powders in sealed 10mg vials, dispatched the same day from within Australia on orders placed before 12pm, with the batch Certificate of Analysis for each lot published in our \u003ca href=\"\/pages\/certifications-of-analysis\"\u003eCOA library\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat is included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × \u003ca href=\"\/products\/semax\"\u003eSemax 10mg\u003c\/a\u003e vial, lyophilised powder ($79.99 individually)\u003c\/li\u003e\n\u003cli\u003e1 × \u003ca href=\"\/products\/selank\"\u003eSelank 10mg\u003c\/a\u003e vial, lyophilised powder ($79.99 individually)\u003c\/li\u003e\n\u003cli\u003e1 × \u003ca href=\"\/products\/bacteriostatic-water\"\u003eBacteriostatic Water 10mL\u003c\/a\u003e ($29.99 individually)\u003c\/li\u003e\n\u003cli\u003e10 × insulin syringes for drawing and transferring reconstituted solution\u003c\/li\u003e\n\u003cli\u003e4 × alcohol swabs for cleaning vial stoppers before puncture\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKey research areas\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCognition and memory\u003c\/strong\u003e Semax raises BDNF and TrkB expression in the rodent hippocampus and has been examined in passive-avoidance and maze tasks; Selank has been studied for memory consolidation under stress.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStress and anxiety\u003c\/strong\u003e Selank produces anxiolytic-like behaviour in rodent elevated plus-maze and open-field paradigms, attributed to changes in GABAergic gene expression. Semax shows anxiolytic-like effects in some stress models by a different route.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnkephalin degradation\u003c\/strong\u003e Both peptides inhibit enkephalin-degrading enzymes in human serum in vitro, a shared mechanism traced to their common Pro-Gly-Pro tail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeuroprotection\u003c\/strong\u003e Semax has been investigated in rat models of focal cerebral ischaemia for effects on neuronal survival and gene expression, and in Russia it is registered as a nasal solution used in stroke care.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImmune and neuroimmune signalling\u003c\/strong\u003e Selank inherits immunomodulatory activity from tuftsin, including effects on interleukin-6 and T helper cytokine balance, linking the pair to research on stress, immunity and cognition.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy these are supplied together\u003c\/h2\u003e\n\u003cp\u003eSemax and Selank are structural cousins with different parents. Semax carries the ACTH(4-7) core and is studied for attention, memory and neuroprotection; Selank carries the tuftsin core and is studied for anxiety, stress and immune regulation. Because they share the Pro-Gly-Pro tail and its enkephalinase-inhibiting property but differ upstream, researchers often run them in parallel to compare a neurotrophic profile against an anxiolytic one under identical conditions.\u003c\/p\u003e\n\u003cp\u003eThe consumables are included because both peptides are supplied lyophilised and must be reconstituted before use. Bacteriostatic water, preserved with 0.9% benzyl alcohol, keeps a reconstituted vial usable for up to 28 days, and one 10mL vial is enough for both peptides.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eKit\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSemax and Selank Bundle (Limitless Bundle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSemax\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10mg vial, CAS 80714-61-0, C₃₇H₅₁N₉O₁₀S, 813.9 g\/mol, Met-Glu-His-Phe-Pro-Gly-Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSelank\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10mg vial, CAS 129954-34-3, C₃₃H₅₇N₁₁O₉, 751.9 g\/mol, Thr-Lys-Pro-Arg-Pro-Gly-Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBacteriostatic water\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10mL vial, sterile water with 0.9% benzyl alcohol\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConsumables\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 insulin syringes, 4 alcohol swabs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCategory\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNootropic research\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePurity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e≥99% HPLC for each peptide, batch COA supplied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eForm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLyophilised powder in sealed sterile vials\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eKit price\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e$169.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage (lyophilised)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2–8°C short term or −20°C long term, protect from light and moisture, avoid repeated freeze-thaw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage (reconstituted)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2–8°C, use within 28 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReconstitution\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBacteriostatic water (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eAvailable sizes and pricing\u003c\/h2\u003e\n\u003cp\u003eThe bundle is supplied in one configuration at $169.99. Bought separately, the Semax vial ($79.99), Selank vial ($79.99) and 10mL bacteriostatic water ($29.99) total $189.97, so the kit saves $19.98 before counting the syringes and swabs. See our \u003ca href=\"\/collections\/kits-and-bundles\"\u003ekits and bundles collection\u003c\/a\u003e for other kits.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSemax and Selank Bundle — $169.99 (20mg of peptide in total, about $8.50 per mg including supplies)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eQuality and COA verification\u003c\/h2\u003e\n\u003cp\u003eBoth peptides in the bundle are tested independently by Janoshik Analytical, with HPLC used to quantify purity and mass spectrometry to confirm that each vial's molecular mass matches its expected sequence. A Certificate of Analysis is issued for every batch of Semax and Selank and published in our \u003ca href=\"\/pages\/certifications-of-analysis\"\u003eCOA library\u003c\/a\u003e, so each vial's lot number can be matched to its own report. The peptides are supplied as lyophilised powders in sealed sterile vials for stability, and the kit is packed with protective cushioning for domestic transit within Australia.\u003c\/p\u003e\n\u003ch2\u003eFrequently bought together\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/n-acetyl-semax\"\u003eN-Acetyl Semax (10mg)\u003c\/a\u003e — $129.99, the acetylated Semax analogue for stability comparison work\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bacteriostatic-water\"\u003eBacteriostatic Water (10mL)\u003c\/a\u003e — $29.99, a spare vial for longer projects\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/semax\"\u003eSemax (10mg)\u003c\/a\u003e — $79.99, for restocking one side of the pair\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/selank\"\u003eSelank (10mg)\u003c\/a\u003e — $79.99, for restocking the other\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResearch guides\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/semax-australia-research-guide\"\u003eSemax Australia research guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/news\/peptide-storage-guide-how-to-store-lyophilised-peptides-properly\"\u003ePeptide storage guide: how to store lyophilised peptides properly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/news\/coa-testing-explained-research-peptides-australia\"\u003eCOA testing explained for research peptides\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/research-calculator\"\u003ePeptide reconstitution calculator\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the Semax and Selank Bundle?\u003c\/strong\u003e\u003cbr\u003eThe bundle contains one 10mg vial of Semax, one 10mg vial of Selank, one 10mL vial of bacteriostatic water, ten insulin syringes and four alcohol swabs. Both peptides are lyophilised powders in sealed sterile vials, each backed by an independent batch Certificate of Analysis, and everything is supplied for in-vitro laboratory use only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are Semax and Selank?\u003c\/strong\u003e\u003cbr\u003eSemax and Selank are synthetic seven-amino-acid peptides developed at the Institute of Molecular Genetics in Moscow. Semax is derived from the ACTH(4-10) fragment and is studied for attention, memory and neuroprotection. Selank is derived from the immune peptide tuftsin and is studied for anxiety, stress and immune regulation. Both share a Pro-Gly-Pro tail that slows enzymatic breakdown.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need bacteriostatic water and syringes?\u003c\/strong\u003e\u003cbr\u003eYes, because both peptides are supplied as lyophilised powder and must be dissolved before use in any assay. Bacteriostatic water is sterile water preserved with 0.9% benzyl alcohol, which keeps a reconstituted vial usable for up to 28 days under refrigeration. The syringes transfer diluent and solution accurately, and the swabs clean vial stoppers. All are included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much do I save with the bundle?\u003c\/strong\u003e\u003cbr\u003eThe Semax vial, Selank vial and 10mL bacteriostatic water cost $189.97 when bought separately, against $169.99 for the bundle, a saving of $19.98. The ten insulin syringes and four alcohol swabs are included on top of that, so the effective saving is larger for anyone who would otherwise buy those consumables separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I buy the items separately?\u003c\/strong\u003e\u003cbr\u003eYes. Semax 10mg and Selank 10mg are each sold individually at $79.99, bacteriostatic water is available in 10mL and 3mL vials, and insulin syringes are sold in packs. The bundle exists for convenience and a lower combined price; researchers who need only one peptide can order the components from their own product pages.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I buy Semax or Selank at Chemist Warehouse or a pharmacy in Australia?\u003c\/strong\u003e\u003cbr\u003eNo. Neither Semax nor Selank is registered on the Australian Register of Therapeutic Goods, so they are not stocked by Chemist Warehouse, Priceline or any other retail pharmacy, and no Australian medicine contains either peptide. The lyophilised compounds in this bundle are research-grade chemicals supplied for laboratory work, a different category of product from a medicine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan Australian compounding pharmacies supply Semax or Selank?\u003c\/strong\u003e\u003cbr\u003eCompounding pharmacies in Australia may only prepare a medicine for a named patient against a valid prescription, and the TGA has published guidance warning pharmacists about compounding and supplying unapproved peptide products. Neither peptide is an approved medicine here, so neither is a routine compounding item. Research suppliers such as Omega Peptides Australia provide the lyophilised research compounds for in-vitro work, not for dispensing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do you reconstitute Semax and Selank?\u003c\/strong\u003e\u003cbr\u003eLet each vial reach room temperature, swab the stopper, then add bacteriostatic water slowly down the inside wall of the vial rather than onto the powder. Swirl gently until clear and do not shake. Reconstitute each peptide in its own vial rather than combining them. The diluent volume depends on the concentration required; our reconstitution calculator can help. Refrigerate at 2–8°C and use within 28 days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should the bundle be stored?\u003c\/strong\u003e\u003cbr\u003eKeep the lyophilised Semax and Selank vials sealed at 2–8°C short term or −20°C long term, protected from light and moisture, and avoid repeated freeze-thaw cycles. Bacteriostatic water is stored at room temperature and used within 28 days of first puncture. Reconstituted peptide solutions are kept refrigerated at 2–8°C and used within 28 days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere can I buy the Semax and Selank Bundle in Australia?\u003c\/strong\u003e\u003cbr\u003eThe bundle is available directly from Omega Peptides Australia. Stock is held domestically, orders placed before 12pm are dispatched the same day, and both peptides are supported by independent batch Certificates of Analysis you can check before ordering. The individual peptides are listed in our \u003ca href=\"\/collections\/research-peptides-australia\"\u003eresearch peptides collection\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the Semax and Selank Bundle cost in Australia?\u003c\/strong\u003e\u003cbr\u003eThe bundle is $169.99 from Omega Peptides Australia. It contains 20mg of peptide across the two vials, about $8.50 per mg with the bacteriostatic water, syringes and swabs included. The two vials alone would cost $159.98, and adding 10mL bacteriostatic water separately brings that to $189.97. Prices are in Australian dollars with tracked shipping calculated at checkout.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I get the Semax and Selank Bundle online in Australia?\u003c\/strong\u003e\u003cbr\u003eOpen the bundle product page, add it to your cart and complete checkout. Orders ship with tracked domestic delivery in discreet, unbranded packaging that gives no indication of the contents. Orders placed before 12pm on a business day leave the same day, and later orders are dispatched the next business day. Tracking details are emailed once the parcel is lodged.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre Semax and Selank legal in Australia?\u003c\/strong\u003e\u003cbr\u003eOmega Peptides Australia supplies Semax and Selank strictly for lawful in-vitro laboratory research. They are not approved by the TGA for human or veterinary use and are not sold as medicines or supplements. Purchasers are responsible for ensuring their intended use complies with all applicable laws. This research-only condition applies to every item in the bundle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSemax vs Selank: what does each do and why are they studied together?\u003c\/strong\u003e\u003cbr\u003eSemax is an ACTH(4-10) analogue studied for attention, memory and neuroprotection through BDNF, melanocortin receptors and enkephalinase inhibition. Selank is a tuftsin analogue studied for anxiety, stress and immune regulation through GABAergic gene expression, enkephalinase inhibition and interleukin-6. They share a Pro-Gly-Pro tail but differ upstream, so studying them together lets a neurotrophic and an anxiolytic profile be compared under identical conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e⚠ For in-vitro research and laboratory use only. Not for human or veterinary use.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Omega Peptides Australia","offers":[{"title":"Default Title","offer_id":43208943403070,"sku":"SEMAX-SELANK-BUNDLE","price":169.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/2123\/3470\/files\/Copyofnewomegaproducts_2.png?v=1787063589"}],"url":"https:\/\/www.omegapeptidesaustralia.com\/collections\/kits-and-bundles.oembed","provider":"Omega Peptides Australia","version":"1.0","type":"link"}